Skyline or Veyron light install help.

[GTI DAZ]

so i got myself some skyline mod lights. and im having trouble getting the wires through the gromit from the boot lid into the boot. and advice?

[MIJ_JAGGER]

Try a metal hanger

[GTI DAZ]

Try a metal hanger

not a bad shout. its F-ing tight to get the cables in there

[MIJ_JAGGER]

I done it with a metal hanger, attach the wire to it and slowly manoeuvre it.
Put some tape on the tip of the hanger so you don’t pierce anything

[RetroRaz]

Metal wire is the one.

Would be good to know how you guys are tapping these in?

Some people have said tap it to 12v feed but I have found 12v is too bright for them as the outers will be dim.

Ive ran the 2 wires into a dimmer so that you can adjust them to match the outers. Same as what Mateyguv did in his youtube videos

[GTI DAZ]

my plan is to tap into the feed for the number plate light. thats what i was told by the seller

[RetroRaz]

my plan is to tap into the feed for the number plate light. thats what i was told by the seller

Number plate light is 12v

So on mine I tapped the number plate 12v into a dimmer input and then on the dimmer output it goes to the lights.

Let us know how you get on, I know the guy on facebook has made quite a few for people, maybe hes got something on his wiring to lower the voltage that comes in.

[GTI DAZ]

managed to get the wire through with some silver steel after 300 hours of fighting lol. found out i cut them 150mm too short 

[ballcrusher]

Where did you get the lights from mate you got a  link....thanks

[cenobytez]

i wired mine to the existing lights.

re getting them, group on facebook, veyron modded lights, he does them