Author Topic: retrofitting Bluetooth module (Read 2076 times)

eb198 · « **on:** March 11, 2018, 09:46:23 pm »

Need urgent help iv bought a new vw bluetooth module part no.1K8035730D. Will this work on my car-
2007 gt tdi highline (red mfd), non mfsw, factory rns510. Theres a million different part numbers and I cant figure out which is the correct one for bluetooth/stream music?
Any help greatly appreciated

Pashka · « **Reply #1 on:** March 12, 2018, 09:56:46 am »

Will work a2dp and bluetooth, but all control via phone. Calling, aswering etc. Its not premium module so wont show anything on 510 or dash.

eb198 · « **Reply #2 on:** March 12, 2018, 10:51:56 pm »

Thanks for getting back to me, which part no. will i need for premium control unit? can this be simply swapped at a later date or will i need to change the loom as well?

Thanks again

Andy · « **Reply #3 on:** March 12, 2018, 11:03:14 pm »

i bought the polar module and it shows in the high line and streams music

https://www.autopolar.net/producto/polarbt-bluetooth-pb01/

you can buy the advanced one if you want ie
boost
temp
voltage etc

eb198 · « **Reply #4 on:** March 13, 2018, 07:22:40 pm »

Can i fit that in instead of any factory vw bluetooth or does a bluetooth module still have to be installed to start with and that piggybacks of it?

cheers

Author Topic: retrofitting Bluetooth module (Read 2076 times)

eb198

retrofitting Bluetooth module

Pashka

Re: retrofitting Bluetooth module

eb198

Re: retrofitting Bluetooth module

Andy

Re: retrofitting Bluetooth module

eb198

Re: retrofitting Bluetooth module