General > Product Reviews
VW Racing Big Brake kit product review
MAT ED30:
been running mine for a while and they have been fantastic and i can drive them crazy hard but as Robin has said give Mat at vwr a call as thats not good as i think the spigot ring you have fitted will be making the car vibrate so get it off and bolt the wheels on without the ring and see if that helps.
MAT ED30:
i have sent what u said to Mat for u :happy2:
xht20:
--- Quote from: RedRobin on March 17, 2010, 08:25:22 am ---TEFF, with all those problems you list, your best bet is to go back to VWR and see what they can do. They'll want to solve these problems and are always very helpful in my experience.
--- End quote ---
I'm from Romania and i cannot go all the way to UK :grin:. I know they are helpful, that's why i don't want to give up so easy with these brakes
--- Quote from: MAT ED30 on March 17, 2010, 08:41:51 am ---i have sent what u said to Mat for u :happy2:
--- End quote ---
The only person with which i talked all the way from the beginning from VWR is Sam Roach. I don't know a guy called Mat :sad1:
Thanks for the help guys
--- Quote from: MAT ED30 on March 17, 2010, 08:33:00 am ---been running mine for a while and they have been fantastic and i can drive them crazy hard but as Robin has said give Mat at vwr a call as thats not good as i think the spigot ring you have fitted will be making the car vibrate so get it off and bolt the wheels on without the ring and see if that helps.
--- End quote ---
I would not like to try this method until i'm 100% sure that it is safe. Until i get this sorted out i will not drive outside the city
tony_danza:
Teff, the bolts will be strong enough - try removing your spigot addition and just be very careful to torque the wheels (with them off the ground for the first bit) a little at a time, picking an opposite bolt each time.
So 12 o'clock bolt. then the 5 o'clock, then 10, then 2 then 7 - it'll naturally pull the wheel central.
Rubbing noise might just be the screw in the arch liner, as you've increase the track width of the car.
MAT ED30:
As Mike says above and if its Sam your dealing with then thats fine but if u speak to Sam and i send the info to Mat we have both people covered :smiley:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version