Hey all, I recently bought a used GTI and it has factory alarm fitted. It seems to me though it doesn't work at all.
I get the continuous red led on the door when I lock the car, no chirping or horn confirmation on lock/unlock,
I tried to activate the motion sensors didn't work as well. Also I scanned the car and it showed me the following errors:
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 1K0-959-433-MAX.clb
Part No SW: 1K0 959 433 AR HW: 1K0 959 433 AR
Component: 01 KSG PQ35 G2 010 0101
Revision: 00010000 Serial number: 00000000000000
Coding: 989002085103007F2D000F0FF0021FC2308000
Shop #: WSC 01367 785 00200
VCID: 800FE68BD3F6581E143-80D5
Subsystem 1 - Component: Sounder No Answer
Subsystem 2 - Component: IRUE No Answer
3 Faults Found:
01135 - Interior Monitoring Sensors
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 4
Fault Frequency: 1
Reset counter: 107
Mileage: 200438 km
Time Indication: 0
Date: 2000.00.00
Time: 22:08:36
00323 - Vehicle Inclination Sensor (G384)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 4
Fault Frequency: 1
Reset counter: 107
Mileage: 200438 km
Time Indication: 0
Date: 2000.00.00
Time: 22:08:36
01134 - Alarm Horn (H12)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 4
Fault Frequency: 1
Reset counter: 107
Mileage: 200438 km
Time Indication: 0
Date: 2000.00.00
Time: 22:08:36
-------------------------------------------------------------------------------
I checked the fuse it seems to be fine.
Any solutions? Will buying a new horn fix all the above?