All Things Mk5 > Performance Modifications

RamAir Fitted Idle Issues

<< < (2/3) > >>

DMackie:
I am quite clued up with VagCom and work in IT so the coding stuff i understand. Just not the best with my hands in an engine.

Got issues with boost leak and now the CanBus Gateway. My weekend is free with no plans so laptop out to fix stuff and will try get the clips moved up a bit and tightened even more.

I want it remapped!

GitFlog:
good stuff have fun :drinking:

Tau:
I have exactly the same problem after fitting the same ram air kit last week. Been trying to find out the problem with no luck

pudding:
The first and 3rd fault codes are the clues.  You have an air leak.  I'd start my investigations with the turbo inlet pipe.

DMackie:
Well i had the car in for a smoke test to check for a boost leak. Thankfully there is no boost leak but the N80 valve was stuck open so that has caused the issues i think. Going to replace it tomorrow.

Navigation

[0] Message Index

[#] Next page

[*] Previous page