SteveP's New Toy

[Hedge]

^^^ Yep from what I understand  it's almost a straight bolt on with just one tab on the block needing to be trimmed down 

I understand JKM are doing this conversion on their new TSI Octy they have on order 

I believe you could be right. 

[wigit]

^^^ Yep from what I understand  it's almost a straight bolt on with just one tab on the block needing to be trimmed down 

I understand JKM are doing this conversion on their new TSI Octy they have on order 

so which you hadnt said that

[Janner_Sy]

steve does the TSI run the same k03 turbo as the Mk5 GTI.  

what are the tuning stages for the TSI then

mk5 gets stage 1(240hp), 2 (260Hp) and 2+(280Hp)

what does the TSI get in comparison. the yanks seem to think the TSi has a lower torque??

[Janner_Sy]

I understand JKM are doing this conversion on their new TSI Octy they have on order

the skoda will be faster and betterer though

[SteveP]

^^^ Yep from what I understand   it's almost a straight bolt on with just one tab on the block needing to be trimmed down  

I understand JKM are doing this conversion on their new TSI Octy they have on order  

so which you hadnt said that

^^^^ and I wish Carl and Kev @ Revo hadn't told me that either  

[wigit]

group discount lol

[Phil Mcavity]

I forgot to ask jim at jkm if they had run any mk6 GTi's down there yet on their rollers. Some people have been saying 275ish on stage 1, but i have an inkling thats a tad high.Although seen a mk6 std car run 225 stock at Surrey RR day on Dyno Dynamics.

[Janner_Sy]

I forgot to ask jim at jkm if they had run any mk6 GTi's down there yet on their rollers. Some people have been saying 275ish on stage 1, but i have an inkling thats a tad high.Although seen a mk6 std car run 225 stock at Surrey RR day on Dyno Dynamics.

this is from JKM .  i dont think there wuill be a stage 2+ though as ther is no fuel pump upgrade

Power Measurement results are as follows:

Stock Power = 207.7 BHP and 210 Ft/Lb

Revo � In Performance mode 2 for 98 RON = 243.8 BHP and 290 Ft/Lb

Result differentials are therefore +36.1 BHP and +80Ft/Lb over the standard levels.

Revo Software is available to go now and priced, at �499+Vat.
Best results will always be on good quality fuel � JKM recommend Shell V-Power

[QD MBE]

Looking good Mr P!....................................

 

(where are the bouncers....................)

[Poppa Dom]

I didn't think that the TSi platform needed a pump upgrade as it can run at 130bar without any issues, have I got it wrong?

[Phil Mcavity]

So by the look of it, the same rough rate in rise compared to the k03 mk5's

[Janner_Sy]

I didn't think that the TSi platform needed a pump upgrade as it can run at 130bar without any issues, have I got it wrong?

thats what i was thinking. therofore only a stage 1 and 2 upgrade required at a guess

So by the look of it, the same rough rate in rise compared to the k03 mk5'

torque is very strong though thast stage 2 TFSI torque territory

[Poppa Dom]

I didn't think that the TSi platform needed a pump upgrade as it can run at 130bar without any issues, have I got it wrong?

thats what i was thinking. therofore only a stage 1 and 2 upgrade required at a guess

Well, if it is the case I would guess that they could probably run a derivation of Stage 2+ code, as the pre-requisital pump is already there 

[wigit]

I didn't think that the TSi platform needed a pump upgrade as it can run at 130bar without any issues, have I got it wrong?

thats what i was thinking. therofore only a stage 1 and 2 upgrade required at a guess

Well, if it is the case I would guess that they could probably run a derivation of Stage 2+ code, as the pre-requisital pump is already there 

we'll see this week 

[Poppa Dom]

  Was wondering if you might say that Andy