Here we go - A further improvement........
^ The finished job, BIALI-style! For those that don't know, BIALI stands for Bodge It And Leg It.
Or rather I should say "the finished with" OEM centre strip after Dan at BIALI Werks had enthusiastically
waved around wielded his dremel and cut out the 'FSI TURBO' lettering for use elsewhere.
^ The cut out badge with edges cleaned up and first coats of silver aluminium paint.
^ The OSIR carbon centre strip cut out to receive the silver badge in exactly the same position as on the OEM strip.
Firstly the cut carbon edges were filed smooth with special tools for carbon and then clear lacquered. It's such attention to detail by Dan that makes a job look professional. I had stuck on my OSIR carbon strip to the black aluminium Evoms engine cover very strongly indeed with lots of Tiger Seal to stop it rattling and so it was far too risky to attempt removing the carbon strip to work on separately. However, our intrepid explorer Dan forged ahead with his trusty dremel.
We decided to allow a small gap around the badge and to fit it flush with the carbon surface so that the whole engine cover looked as if it was originally manufactured with the 'FSI TURBO' badge and so it wouldn't look merely stuck on. Here are some pics of the finished job:
I am extremely pleased with what Dan has done. It was my design idea but Dan has made the engine cover look professionally manufactured as a whole and must take the credit for that. I like it so much that if I ever sell this car, I am keeping the engine cover to display on my a wall at home as a very fond momento.