Gti Pioneer Head unit

[Trav Turbo]

Hi all I've been just bought a new Pioneer Double Din head unit to replace my old Pioneer. It all works well but whenever I turn the key it resets itself and loses whatever I had on previously. I've swapped the red & yellow wires around and still resets itself. I've heard I need to run a separate power supply for it, I'm presuming  a fuse tap is what I need.

Has anyone had this problem before and sorted it?

Or is there a guide available to run a separate power supply to do it?

Thanks.

Sent from my SM-N910F using Tapatalk

[neilw]

Do you have any kind of harness adapter installed? I think the standard on/off signal comes from the Canbus, which may be confusing it.

What facia adapter have you used? as I'm probably going to replace mine at some point.

[Trav Turbo]

No canbus just plug and play with mine, only had to change facia to fit it. I'll look into it but haven't heard of people using canbus to fit aftermarket stereos, I didn't use one on my previous Pioneer stereo in my car which I had for few years.

Sent from my SM-N910F using Tapatalk