Make a donation

Author Topic: Retro fitting Xenons  (Read 2789 times)

Offline Nickyboy

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 7
  • Posts: 368
  • 2007 ED30 in Grey
Retro fitting Xenons
« on: February 19, 2010, 09:26:28 pm »
OEM Xenon headlights, how hard/expensive?

This has been covered already i'm sure but I can't find it.

TIA

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7835
  • ED30 No.1412
    • Email
Re: Retro fitting Xenons
« Reply #1 on: February 19, 2010, 11:44:06 pm »
It involves taking the front bumper off. If you fit autolevelling sensors and washer jets as well cost is around £2000 from what I've seen.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline Nickyboy

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 7
  • Posts: 368
  • 2007 ED30 in Grey
Re: Retro fitting Xenons
« Reply #2 on: February 19, 2010, 11:50:45 pm »
Jeezo  :rolleye:

What was the cost as an option when new?

Offline ollie288

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 21
  • -Receive: 13
  • Posts: 910
    • Email
Re: Retro fitting Xenons
« Reply #3 on: February 19, 2010, 11:53:27 pm »
It involves taking the front bumper off. If you fit autolevelling sensors and washer jets as well cost is around £2000 from what I've seen.

Are you talking brand new SW?

Used xenons, brand new auto levelers and adaptors.
The xenons can be had for around £350-£400 (ebay), 10-12 pin adaptor is £50(kufatec) and the auto leveling kit is around £350 from kufatec. If you feel confident to fit them yourself then it be around £800 for the full job, if you dont want the auto levelers then obviously minus the cost.

The actual changing of the lights is easy enough if you can take the bumper off. You will also need someone with vag com to change the car settings to xenons. :happy2:

Offline rdfcpete

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 98
  • -Receive: 52
  • Posts: 2567
    • Email
Re: Retro fitting Xenons
« Reply #4 on: February 20, 2010, 03:43:23 pm »
If you've not got washer jets, I wouldn't bother Nicky.

If you have, then it can be done for under £1000 if you buy wisely and are lucky with Ebay as Ollie says.
I'm mid process myself and I've scoped out that I won't spend more than £900 even if I'm unlucky, although my vehicle has the winter pack, thus OEM headlamp washers on the car out the factory.

That £900 will cover Xenon headlights with ballasts + bulbs, the kufatec auto leveling kit and fitting at my local Porsche/VW Specialist, which then means my setup will be fully legal. Minus the washers and/or the leveling kit and technically (+ legally etc...) your cars not fit for the road MOT wise. Up to you though...

HTH's mate.
Pete


RNS-E LED 2012 | Aux-In | AP Coilovers |  Hawk HPS Pads | Revo Stage 1+
Previous: OEM+ 2006 MK5 Golf GTI 2.0T FSI Steel Grey 3 Door

Offline ollie288

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 21
  • -Receive: 13
  • Posts: 910
    • Email
Re: Retro fitting Xenons
« Reply #5 on: February 20, 2010, 03:54:29 pm »
If you've not got washer jets, I wouldn't bother Nicky.

If you have, then it can be done for under £1000 if you buy wisely and are lucky with Ebay as Ollie says.
I'm mid process myself and I've scoped out that I won't spend more than £900 even if I'm unlucky, although my vehicle has the winter pack, thus OEM headlamp washers on the car out the factory.

That £900 will cover Xenon headlights with ballasts + bulbs, the kufatec auto leveling kit and fitting at my local Porsche/VW Specialist, which then means my setup will be fully legal. Minus the washers and/or the leveling kit and technically (+ legally etc...) your cars not fit for the road MOT wise. Up to you though...

HTH's mate.

But just so you dont get confused it will pass an MOT without washers or levelers.  :happy2:

And I dont think the washers will b to much of a problem. Pm scott (golfman) Im sure he will tell you what is involved and the cost of it as he has just had it done.

Also I have had the xenons without the levelers and washer for months and not had a problem. Its been into VW for a service and MOT is soon and they have not mentioned anything. The reason I am not fitting levelers is because I am selling the car soon.  :happy2:

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7835
  • ED30 No.1412
    • Email
Re: Retro fitting Xenons
« Reply #6 on: February 20, 2010, 03:59:55 pm »
I am selling the car soon.  :happy2:
What you gonna do with the xenons? keepsies or sellsies?

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline Nickyboy

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 7
  • Posts: 368
  • 2007 ED30 in Grey
Re: Retro fitting Xenons
« Reply #7 on: February 20, 2010, 04:14:58 pm »
£800  :sick:

Think i'll just stick to uprated bulbs!

What are the dipped bulbs anyway? H1?

Cheers again

Offline ollie288

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 21
  • -Receive: 13
  • Posts: 910
    • Email
Re: Retro fitting Xenons
« Reply #8 on: February 20, 2010, 04:25:00 pm »
Up-rated bulbs are no where near xenons in performance but granted alot cheaper!

They are H7.

@ Stealthwolf

There keepsies Stealth. :happy2:

Offline scotta

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 15
  • Posts: 446
  • Edition 30
Re: Retro fitting Xenons
« Reply #9 on: February 20, 2010, 05:44:44 pm »
I got Osram night breakers £15 for a set of two h7. They are pretty good. Obviously not xenons but lots cheaper !

Offline Comms

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 61
    • Email
Re: Retro fitting Xenons
« Reply #10 on: April 03, 2011, 10:56:00 pm »
Reviving an old thread here  :grin:

Just to clarify on this in my simpleton mind. If I was to fit the kit you have Ollie but minus the headlamp washer jets on my gti then my car is actually not road legal?
For it to be fully road legal I would need the auto levellers and the washer kit?

How much would I be looking at to get the headlamp washers sorted approximately? Also where would be the alternative place to pick them up aside from the stealership?

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7835
  • ED30 No.1412
    • Email
Re: Retro fitting Xenons
« Reply #11 on: April 03, 2011, 11:23:16 pm »
I think a few people have had the full lot done. It might be worth searching for it. The cost seems to come to about £1000 for everything (off the top of my head, may be wrong).

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline rdfcpete

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 98
  • -Receive: 52
  • Posts: 2567
    • Email
Re: Retro fitting Xenons
« Reply #12 on: April 03, 2011, 11:25:06 pm »
For it to be fully road legal I would need the auto levellers and the washer kit?

Your understanding is correct here Comms  :happy2:

In regards to finding some HL washers, I would try the market place here and also eBay.
A quiet word with someone like MortyGTTDI (Darren) will also be worth while as Darren is superbly helpful with these kinds of resources and supplies  :smiley:
Pete


RNS-E LED 2012 | Aux-In | AP Coilovers |  Hawk HPS Pads | Revo Stage 1+
Previous: OEM+ 2006 MK5 Golf GTI 2.0T FSI Steel Grey 3 Door

Offline Comms

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 61
    • Email
Re: Retro fitting Xenons
« Reply #13 on: April 03, 2011, 11:42:04 pm »
Awesome, will drop him a line.

I am just now wondering if I would get pulled over if I was to get these fitted on Sunday  :scared:

MOT is not due until Oct so I should have it all sorted by then.