Think you may just need to do a quick recode using VCDS mate, you need to enable the 'xenon equipped' tick box although iirc there is something to do with having the 'with or without shutter' option depending on whether you have run the wire to the central convenience module to enable the xenon high beam or not
Doh Too late........................... cheers Beddie.
Now i'm REALLY confused
Xenon high beam sounds interesting but what exactly is involved, i'm getting the normal Kufatec adapter but i have a horrible suspicion there's more involved?!?!?
Jono,
The Xenon light includes a shutter across the xenon bulb. There are 2 scenarios with this.
1. If you don't run the wires to the Con Module, then the shutters will not be active, by active i mean they will not have any power running to them. The shutter moves when main beam is selected and you get a Xenon main beam.
2. if you don't run the wires, the shutter will be inactive and all you will have is the Xenon dipped beam, and when you switch mains on, the shutter will not move and the halogen will be the only main beam, with a dipped xenon back up.
Coding, if you have not run the wires to the con module, then code them as xenons without shutters fitted, and you will not get any fault codes, if you have run the wires, then code xenons with shutters fitted.
HTH