Make a donation

Author Topic: Edition 35 project for someone?  (Read 3168 times)

Offline john_o

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 136
  • -Receive: 108
  • Posts: 2946
    • My Car Blog
Edition 35 project for someone?
« on: June 20, 2019, 03:49:50 pm »
Pricey (based on miles and Cat N status) but maybe you could offer lower and rebuild
https://www.ebay.co.uk/itm/153535242284?ul_noapp=true
Red ED35 5dr DSG
DEFI boost guage / RTech Stg1 Engine/DSG / PPMk7 front brakes
BLOG | BUILD

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 690
  • Posts: 8354
Re: Edition 35 project for someone?
« Reply #1 on: June 28, 2019, 05:07:23 pm »
£8.5K!!!  It should have been scrapped imo.  The frame rail on the passenger side will almost certainly be bent.  You'll never sell it again.

ED35s aren't special enough to save anyway imo.  Worth saving a MK6 R, but not that.  Probably the blandest special edition, visually, VW have ever produced.


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline Dooge

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 43
    • Email
Re: Edition 35 project for someone?
« Reply #2 on: June 30, 2019, 05:18:04 am »
£8.5K!!!  It should have been scrapped imo.  The frame rail on the passenger side will almost certainly be bent.  You'll never sell it again.

ED35s aren't special enough to save anyway imo.  Worth saving a MK6 R, but not that.  Probably the blandest special edition, visually, VW have ever produced.

I agree with you, I've seen alot less damage on cars result in tracking issues or chassis parts twisted.

Offline colesey

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 6
  • -Receive: 89
  • Posts: 1019
Re: Edition 35 project for someone?
« Reply #3 on: June 30, 2019, 08:39:07 am »
If it's so easy to repair, then you gotta wonder why the seller is listing in this state and not doing the work himself........

Offline Dooge

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 43
    • Email
Re: Edition 35 project for someone?
« Reply #4 on: September 15, 2019, 10:46:03 pm »
I did far less damage in my previous BMW e46 320d when I was run off the toad and his a grass bank. They replaced the shock, wishbone, track rod end, springs and topmounts. The car was never the same, tracking was always out, the difference in camber between both sides was approximately 1.5 degrees but it seemed enough to ruin it. I suspect the strut tower was ever so slightly out. It wasn't a write off, god knows how bad something like that would be.

Offline corradovr6

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 2
  • Posts: 53
    • Email
Re: Edition 35 project for someone?
« Reply #5 on: January 17, 2020, 03:47:19 pm »
difficult to repair that one