R32 engine swap

[Baileygtibray]

Right, so over the winter I want to engine swap my 2.0tfsi gti.
I would like to go down the r32 route, with a high possibility of turbocharging it. I’ve done my research for that so I’m okay in that area.
My main area that I need help with is the gearbox. As I want to keep this front wheel drive. Yes it will be a handful. Yes it will torque steer but this is how I want my car.
Now, is it just as simple as using the r32 flywheel and clutch and using my 6 speed Manuel gti gearbox? Or is there a different combination I’ll need to use. I have seen a kit that lets you use the r32 box, but blanks off the transfer case. Can I do this?
Another thing is if I do use the gti box will it fit in the engine bay? Is the r32 lump longer than the 2.0tfsi?

Thank you to anyone who can help me

[GVK]

4 cylinder gearbox won't fit a 6 cylinder.

[J66hhr]

4 cylinder gearbox won't fit a 6 cylinder.

Those v6's are quiete big engines should be enough for a 4 cylinder?

Sent from my SM-G935F using Tapatalk

[GVK]

The 6 cylinder bell housing is a different shape than the 4 cyl, so again, it won't fit.

[rich83]

Why will it torque steer?

[ChrisGT]

I do love a good project. Is it silly to ask why you don't just get rid of the gti and get an r32 then turbo charge it and remove the rear prop shaft? 

Chris

[Clart]

Would make sense, you can pick up R32s dirt cheap these days.