HPFP fitted.

[KRL]

So how does your car feel now? 

[gillm]

to be honest i have not driven it , im off ill at the moment with a inner ear infection so feel dizzy alot of the time . but will see how i feel tomorrow . was handy being dizzy tho as my dad removed it from the car :)

[Janner_Sy]

i was thinking with the guys with revo and an SPS.  is there any need to go stage 2+. could you not just up the boost and fueling??

[Poppa Dom]

i was thinking with the guys with revo and an SPS.  is there any need to go stage 2+. could you not just up the boost and fueling??

You could but the Stage 2+ map is optimised for the pump, IIRC Stage 2 is not.

[KRL]

I am planning to run the pump with stage 1 and do as Sy suggested - richen up the fueling and up the boost.

Obviously it would be best to run an optimised 2+ map but I think there are still good gains to be had even at stage 1.

[Poppa Dom]

Agreed, I did run my pump on Stage 2 and optimised fuelling and timing, did not increase boost. However the Stage 2+ did take it to a whole new level.

[bacillus]

iirc the stage 2 revo map only calls for 110 bar fuel rail pressure whilst stage 2+ ups that to 130 bar.

This means that injection timing for the same fuel load is shorter with the 2+ map with a little extra in hand for even richer fuel setting vs stage 2.

[KRL]

Maybe its different on the the K03 but on the K04 up to 130 bar is requested even at stage 1 which causes the pump to struggle:

[bacillus]

Maybe its different on the the K03 but on the K04 up to 130 bar is requested even at stage 1 which causes the pump to struggle:

Yup, I was speaking of the k03...

From that plot, it would seem to me that revo should say that even their stage 1 would benefit from an uprated hpfp.

[Hedge]

Maybe its different on the the K03 but on the K04 up to 130 bar is requested even at stage 1 which causes the pump to struggle:

Yup, I was speaking of the k03...

From that plot, it would seem to me that revo should say that even their stage 1 would benefit from an uprated hpfp.

I seem to remember reading something from one of the Revo boys that said as much.

[Beddie]

Could the same be said re Bluefin stage 1?
The HPFP is a mod i really fancing doing especially for the mid range increases it seems to give, i'm running a lowly stage 1 bluefin, cat back Milltek and Carbonio with ITG filter, HPFP worth doing??

[Hedge]

Could the same be said re Bluefin stage 1?
The HPFP is a mod i really fancing doing especially for the mid range increases it seems to give, i'm running a lowly stage 1 bluefin, cat back Milltek and Carbonio with ITG filter, HPFP worth doing??

Not on Superchips as they only request 110bar rail pressure unless it is a pump specific software.

[Beddie]

Could the same be said re Bluefin stage 1?
The HPFP is a mod i really fancing doing especially for the mid range increases it seems to give, i'm running a lowly stage 1 bluefin, cat back Milltek and Carbonio with ITG filter, HPFP worth doing??

Not on Superchips as they only request 110bar rail pressure unless it is a pump specific software.

Cheers mate 
I might enquire with Superchips as to whether they can do a HPFP map for stage 1 then?

[Aparoon]

Why not just buy a downpipe and stop being soo cheap 

It's only another £500, hardly worth not doing 

[gillm]

ive now driven it and yeh there is defo more power mid range and upwards . great mod :)