Hi Guys
@St282 @titchy @Pudding Got my inlet clean yesterday (Inlet was dirty) and injectors tested (Injectors are fine) by ASK tuning - unfortunately, my cylinder 2 is misfiring because the ring/piston is damaged
Thinking if I should just sell the car as it is as I have spent so much money on it, the last 2 months I spent near £2k on it.
or should I do a CDL engine refurb someone is asking for £2k. This is what they are going to do below
Engine block thoroughly cleaned & surfaces treated
Engine block surfaces machined flat
Tolerances checked on wearable items
Oil pumps inspected/replaced if necessary
Cylinder head skimmed or replaced if necessary
New OEM oil seals installed
New OEM valve seals installed
Valve seats machined
Valve lapped to ensure a tight seal
Block cylinders inspected for cracks
New cylinder liners fitted
Cylinders machined to factory specification
New upgraded gas nitride ion piston rings fitted
Connecting rods inspected & machined if necessary
Crank shaft crack tested, ground & polished to specifications
New OEM big end bearings fitted
New OEM main bearings fitted
New OEM spec Eristic head gasket fitted
All bolts torqued to specification in accordance with Auto data
Assembled units oil pressure tested
Assembled units compression tested