Edition 30 powered by RBS

[RBS]

And also the front ones are ready to be installed

[RBS]

If I find a gap this week in the evening, I’ll mount the rear shocks
and springs first.
Nothing difficult to mount and adjust…😎

The front is basically the same but I’ve got to disassemble the gearbox mount along with the dogbone mount and press in the Vibra-Technics gearbox bushing in… also the SuperPro wishbones with all new bushings and the Tyrolsport deadest ridgid collars…

That’s going to be a workout 😅 But it must be done😎
And then finally… the brakes🤩

So it won’t be boring the next couple of weeks😉👍🏻

[RBS]

Found a gap today!
Swapped the rear shocks and springs, was a pretty straightforward
and satisfying job😎 torqued all the new nuts & bolts up….
Kept the rear on original height for now. When the front is done, I’ll drop it 3 to 4cm.
It’s weird!?! I’m all excited about it😅 even now when whole my body is in pain😅
I can feel some muscles are still hurting from last Friday….
Reality bites😅
But enough blabbering… here are some pics…

[RBS]

Something is missing 😁



And all mounted but still had to adjust the ride height…