Wheel fitment

[Alynponty]

Been trying to read up on what fits and what doesn't and just end up confusing myself, so would a 18x8.5 et options are 35,40,45. Would these fit without any running issues, car is stock height at present but will be lowering 20-30mm around in the future, also I should mention I have 3 kids so with the wife car is full up alot for spins so dont want any rubbing issues, any idea if any of these filaments would be ok?

Sent from my SM-A705FN using Tapatalk

[GTI DAZ]

use this site, just pop in the current and new fitment.

OE fitment is: 18 x 7.5J ET51 with 225/40/18 tyre

https://www.willtheyfit.com/?width=225&aspect=45&diameter=18&wheelwidth=8&offset=40&width2=225&aspect2=40&wheel_size=19&wheel_width=8&offset2=40

[colesey]

I don’t think you want to go much more than 8” / 45mm to avoid rubbing with a lowered and loaded car. Even then you will need to do the arch liner mounting screw mod.

[Alynponty]

use this site, just pop in the current and new fitment.

OE fitment is: 18 x 7.5J ET51 with 225/40/18 tyre

https://www.willtheyfit.com/?width=225&aspect=45&diameter=18&wheelwidth=8&offset=40&width2=225&aspect2=40&wheel_size=19&wheel_width=8&offset2=40

Thanks mate looks like an et35 would be the one then, sits slightly further from steut but pokes out 28mm more which is fine as plenty of room in the arch to fill

Sent from my SM-A705FN using Tapatalk

[Alynponty]

I don’t think you want to go much more than 8” / 45mm to avoid rubbing with a lowered and loaded car. Even then you will need to do the arch liner mounting screw mod.

What is the mounting screw mod mate

Sent from my SM-A705FN using Tapatalk

[Alynponty]

Found the thread on the arch mod

Sent from my SM-A705FN using Tapatalk