MFSW Part number check please.

[GTI 500]

Hi Guys, just need a little help/advise, i have a MK5 GTI 2005, going to fit a mfsw,just want to check part numbers for the parts i need to get/fit.
Air bag loom  1k0 971 584 C
Clock spring  1K0 959 653 C
Control unit  1K0 953 549 AJ or CH,
Can you guys confirm these are correct.
Thanks.
 

[terrier]

Hi Guys, just need a little help/advise, i have a MK5 GTI 2005, going to fit a mfsw,just want to check part numbers for the parts i need to get/fit.
Air bag loom  1k0 971 584 C .. Yes the one with the black plug for the controls
Clock spring  1K0 959 653 C … Yes
Control unit  1K0 953 549 AJ or CH,...Yes  I used the CH as it was easy to get hold of
Can you guys confirm these are correct..... If fitting a MK5GTI wheel
Thanks. 
 

  Make sure you have vcds to sort the coding

[GTI 500]

Thanks for the reply terrier .

[PROSEAL]

What wheel are using MK5 or MK6?  Looking at doing for my 2008 GTi.  Have the loom and bought the MFSW buttons (OEM) only to realise that you cant retrofit on to an existing GTi steering with (non-DSG) No where to screw them.  So if anybody on here as non-MFSW steering wheel with DSG, I have the buttons, module and airbag loom to convert their car for sale...

[GTI 500]

Got hold of an Edition 30 mfsw, non DSG.

[LC5F]

only to realise that you cant retrofit on to an existing GTi steering with (non-DSG) No where to screw them.

The screw holes are there, just covered by plastic, you need to trim back
Go to page 4 for pics in this link: https://www.mk5golfgti.co.uk/forum/index.php/topic,95667.45.html

[GTI 500]

Fitted the CH control unit, car already had the correct slip ring (1K0 959 653 C) fitted the 1K0 971 584 C air bag loom, and coded, all buttons working but no horn & was unable to turn ESP & tyre warning lights off even after driving the car?
Put the original air bag loom back on & horn works & lights go out??
Any ideas??   

[shoaybmakda]

How do you check what controller you have?

[terrier]

How do you check what controller you have?

vcds scan

[Octoparrot]

Fitted the CH control unit, car already had the correct slip ring (1K0 959 653 C) fitted the 1K0 971 584 C air bag loom, and coded, all buttons working but no horn & was unable to turn ESP & tyre warning lights off even after driving the car?
Put the original air bag loom back on & horn works & lights go out??
Any ideas??

Did you perform the steering adaptation after fitting?

[shoaybmakda]

How do you check what controller you have?

vcds scan

@terrier Sorry to be thick but where would I check in vcds?

[GVK]

Do a full scan (Auto scan) and in each section it gives part numbers/ coding for each module.
After you do a full scan it should be saved into your VCDS folder under 'scans'


scan by GVKmotorsport, on Flickr

[shoaybmakda]

thanks @GVK - so the controller number is 1k0953549BC in that case? (obviously mine may be different - will scan and check!)

[GVK]

Yes that's my car's scan (Mine is billy-basic,no MFSW)