Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Oil pickup pipe, O ring mystery.  (Read 799 times)

Offline JR.303

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 4
  • Posts: 80
    • Email
Oil pickup pipe, O ring mystery.
« on: July 02, 2020, 04:50:35 pm »
Just been spending again.
Cam belt, pre cat delete and clean the mesh on the oil pick up pipe on a 94.000 miles but no service history.
All good and not a lot of junk in the strainer except for a small O ring, well at least 2/3 of one. Luckily the other bit was in the sump.
Any one got any idea where it may have come from?
Logged

Offline Octoparrot

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 8
  • -Receive: 102
  • Posts: 996
    • Email
Re: Oil pickup pipe, O ring mystery.
« Reply #1 on: July 02, 2020, 05:03:47 pm »
Depends how small, dipstick?
Logged

Offline bobby_fodge

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 22
  • -Receive: 38
  • Posts: 842
    • Email
Re: Oil pickup pipe, O ring mystery.
« Reply #2 on: July 02, 2020, 06:17:18 pm »
There is a small o ring that fits between the oil pick up pipe where it fits into the oil pump.

About the size of a penny, mine have always been orange or green.
Logged

Offline JR.303

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 4
  • Posts: 80
    • Email
Re: Oil pickup pipe, O ring mystery.
« Reply #3 on: July 02, 2020, 07:05:50 pm »
It was about 6mm. The green one was there.
Logged
Pages: [1]   Go Up
« previous next »