I can only see two white plastic adjusters one up and down and one left and right. does any one who has these know how to make these better?
If you look at the back of the case below the bulb cover for the main beam, you will see a small hex bolt sticking out slightly. I think it is a 4mm hex (from memory)You use the white side to side adjuster to align the beams to straight ahead, and then the up/down one to level
both main and dip beam.The hex adjuster is used to adjust the main beam (i think) up and down independantly.Basically you do both beams simultaneously for height, and when the dip is correct, then the main can be adjusted to suit via the hex adjuster. I hope this makes sense and helps.
Pagey, the lights i saw were for a LHD golf- sorry mate. Tuning fanatics are still the cheapest i have found....