Make a donation

Author Topic: Fitting Black front grille badge  (Read 9582 times)

Offline Robert74

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 5
  • Posts: 84
Fitting Black front grille badge
« on: March 19, 2010, 10:42:35 am »
I have bought a Black VW badge for the front of my GTI MK5 but cannot work out how to change it. Any help will be greatly appreciated. Do you have to take the whole grille panel off and if so how? Thanks
2006 GTI 5 door DSG

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Fitting Black front grille badge
« Reply #1 on: March 19, 2010, 12:07:11 pm »
If you push the badge in and turn anticlockwise, it should come off. The problem is that there's a good chance you'll break one of the securing lugs. Instead it's four screws and you can pull off the grille and change the badge without breaking anything.

Remember: if *I* can do it, so can you!

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline Robert74

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 5
  • Posts: 84
Re: Fitting Black front grille badge
« Reply #2 on: March 19, 2010, 12:30:38 pm »
Thanks for that. Where are the 2 lower screws? I can see the ones at the top.
2006 GTI 5 door DSG

Offline Robert74

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 5
  • Posts: 84
Re: Fitting Black front grille badge
« Reply #3 on: March 19, 2010, 01:47:54 pm »
Thanks stealthwolf I have done it! I managed to just twist it off, easy when you know how. Black badge looks great. Does any one know where I can get a Black GTI badge for the front grille.
2006 GTI 5 door DSG

Offline Mark_eire

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 1
  • Posts: 148
  • Dublin, Ireland
    • Email
Re: Fitting Black front grille badge
« Reply #4 on: March 19, 2010, 07:00:08 pm »
Where did you get the black badge?
I was going to get one from the scrap yard and paint it matt black, but if I can get one already black thats a bonus!
2010 Audi A6 Avant S-Line
2007 VW Golf GTI

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Fitting Black front grille badge
« Reply #5 on: March 19, 2010, 07:58:30 pm »
I got mine from dubstop intl. Something like £8 all in or something equally silly.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline Robert74

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 5
  • Posts: 84
Re: Fitting Black front grille badge
« Reply #6 on: March 19, 2010, 10:30:26 pm »
I got it on ebay from "goingfast" it cost about £15 and has a nice black chrome finish.
2006 GTI 5 door DSG

Offline FamilyDub

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 2
  • Posts: 256
  • ...who needs a diesel?
Re: Fitting Black front grille badge
« Reply #7 on: March 23, 2010, 01:52:06 pm »

I painted mine. Cost £2.50 in wet & dry sandpaper project kit from Halfrauds and that was it.   :happy2:
MKV GTI | Reflex Silver | 5-dr, Family-Spec | 17" w/anthracite Finish | Manual | Highline | Cruise | Revision 'D' DV | Dirty Pipes |

Offline bwen

  • Just Arrived
  • **
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 11
  • MKV GTI Pirelli
Re: Fitting Black front grille badge
« Reply #8 on: March 25, 2010, 10:26:44 am »
Thanks for that. Where are the 2 lower screws? I can see the ones at the top.

There's two T25 (i think) screws when you open the bonnet, then there are two screws in the honeycomb under where the number plate sits, once you undo all four screws the panel comes off and you can replace the front emblem, GTI badge and even the red strip once you're done

I did black side mirrors, smoked indicators, yellow strip and blacked front emblem to have something a bit different


Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Fitting Black front grille badge
« Reply #9 on: March 25, 2010, 03:30:30 pm »
I really think the Pirelli should have come with a yellow stripe and yellow calipers to match the interior.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline bwen

  • Just Arrived
  • **
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 11
  • MKV GTI Pirelli
Re: Fitting Black front grille badge
« Reply #10 on: March 26, 2010, 01:31:24 am »
I'm getting my calipers done the same tone of yellow as the front strip soonish :)

Offline andrewparker

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 78
  • Posts: 1770
Re: Fitting Black front grille badge
« Reply #11 on: March 26, 2010, 08:59:54 am »
That Pirelli is lovely. Matt black lower splitter too possibly?

Offline JPC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 93
  • -Receive: 111
  • Posts: 6222
Re: Fitting Black front grille badge
« Reply #12 on: March 26, 2010, 09:21:25 am »
id be doing the brakes and band yellow asap if i had a pirelli! ;0

Offline bwen

  • Just Arrived
  • **
  • Thank You
  • -Given: 1
  • -Receive: 0
  • Posts: 11
  • MKV GTI Pirelli
Re: Fitting Black front grille badge
« Reply #13 on: March 27, 2010, 12:04:30 pm »
That Pirelli is lovely. Matt black lower splitter too possibly?

Maybe, so many plans at the moment. I just want to break up the silver a little bit, thinking of getting these wheels to go with it... still a bit unsure though



edit: in 5x112 obviously :P

Offline andrewparker

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 32
  • -Receive: 78
  • Posts: 1770
Re: Fitting Black front grille badge
« Reply #14 on: March 27, 2010, 07:55:34 pm »
They're OK, but I love the Pirelli wheels so personally I'd be sticking with them!