Make a donation

Author Topic: can a sub and amp be connected to an rcd300  (Read 3830 times)

Offline regi

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 53
can a sub and amp be connected to an rcd300
« on: March 14, 2010, 06:52:34 pm »
hi could someone please tell me if its possible to connect a sub and amp to a rcd 300 and if so what it involves,thanks

Offline DanoGTI

  • Always Involved
  • ****
  • Thank You
  • -Given: 11
  • -Receive: 3
  • Posts: 293
    • DA Productions
Re: can a sub and amp be connected to an rcd300
« Reply #1 on: March 14, 2010, 07:09:59 pm »
Hi Regi,

Welcome to the board - there's a Line Out box that is required..

Not a very good result though due to the overall rubbishness of the RCD300.....

http://uk-mkivs.net/forums/p/36247/298607.aspx#298607

You will lose the rear speakers though -
Have a look at this link -

http://www.talkaudio.co.uk/vbb/showthread.php?t=253090

There's a link to what you need.

Better off upgrading to a better Head Unit IMHO. Even the RNS.......  :wink:

Dan


DA Productions

The fine art of diplomacy is telling somebody to "fcuk off" in such a way that they actually look forward to the journey....

Offline Andy

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 443
  • Posts: 10935
    • Email
Re: can a sub and amp be connected to an rcd300
« Reply #2 on: March 15, 2010, 12:28:53 am »
i connected a 2 amps and a sub to a rcd300-but i put new speaker wire in to make all 4 speakers work

Offline regi

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 53
Re: can a sub and amp be connected to an rcd300
« Reply #3 on: March 16, 2010, 05:28:31 pm »
thanks guys,ive been told a converter box can be tapped into the rear speaker wires to convert to rcd's.dont no how good this would be?