All Things Mk5 > How to Guides / Troubleshooting

Removing front bumper or if possible, the front lip (Edition 30)

(1/3) > >>

Vick N:
Hi guys,

I am looking to remove our mk5's front lip if possible to carbon vinyl it. I have had a few mk4's so getting stuck in is not the issue but can I just remove the bottom lip instead of the whole lot?

If so, any tips on where the 'right' bolts are?  :ashamed:

Any help would be great.  :drinking:

Thanks

Vick   :smiley:

monte:
Not sure about the lip but here is a guide for the bumper  :happy2:

http://forums.vwvortex.com/zerothread?id=3443678

JPC:
To be perfectly honest, it is easier the take the whole bumper off than just the lip.

They are very easy to remove.

4 screw in each wheel arch
8 screws underneath
4 screws to remove the grill
some mk5s have 2 screws in the front slam panel too. Some don't

then it just slides off

to take off the lip you still have to remove screws from the arches, all the ones underneath and then you have to unclip about 20 clips holding the lip to the bumper which are a beeehatch! Then to refit, it's just as problematic. Those clips can be quite stubborn

monte:

--- Quote from: JPC on March 20, 2010, 11:14:55 am ---To be perfectly honest, it is easier the take the whole bumper off than just the lip.

They are very easy to remove.

4 screw in each wheel arch
8 screws underneath
4 screws to remove the grill
some mk5s have 2 screws in the front slam panel too. Some don't

then it just slides off

to take off the lip you still have to remove screws from the arches, all the ones underneath and then you have to unclip about 20 clips holding the lip to the bumper which are a beeehatch! Then to refit, it's just as problematic. Those clips can be quite stubborn

--- End quote ---


What about the rear bumper Jay? Is that as straight forward as it looks? I am gonna take off the rear bumper to carbon my diffuser  :wink:

Vick N:

--- Quote from: JPC on March 20, 2010, 11:14:55 am ---To be perfectly honest, it is easier the take the whole bumper off than just the lip.

They are very easy to remove.

4 screw in each wheel arch
8 screws underneath
4 screws to remove the grill
some mk5s have 2 screws in the front slam panel too. Some don't

then it just slides off

to take off the lip you still have to remove screws from the arches, all the ones underneath and then you have to unclip about 20 clips holding the lip to the bumper which are a beeehatch! Then to refit, it's just as problematic. Those clips can be quite stubborn

--- End quote ---

Thanks dude, I can leave the lip on If the whole bumper comes off in one go, only want to carbon wrap the lip  :happy2:

What about headlamp washers? do they just unplug? Will they create any faults on the Ecu?  :confused:

Ta.

Vick

Navigation

[0] Message Index

[#] Next page