Make a donation

Author Topic: Removing front bumper or if possible, the front lip (Edition 30)  (Read 8999 times)

Offline Vick N

  • Always Involved
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 0
  • Posts: 150
    • Email
Hi guys,

I am looking to remove our mk5's front lip if possible to carbon vinyl it. I have had a few mk4's so getting stuck in is not the issue but can I just remove the bottom lip instead of the whole lot?

If so, any tips on where the 'right' bolts are?  :ashamed:

Any help would be great.  :drinking:

Thanks

Vick   :smiley:

Offline monte

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 116
  • -Receive: 134
  • Posts: 2747
  • Global Ruler
    • Deep-Shine Detail. Detailing-Wrapping-Tints. Lincoln.
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,67679.0.html
Re: Removing front bumper or if possible, the front lip (Edition 30)
« Reply #1 on: March 20, 2010, 01:45:04 am »
Not sure about the lip but here is a guide for the bumper  :happy2:

http://forums.vwvortex.com/zerothread?id=3443678

Offline JPC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 93
  • -Receive: 111
  • Posts: 6222
Re: Removing front bumper or if possible, the front lip (Edition 30)
« Reply #2 on: March 20, 2010, 11:14:55 am »
To be perfectly honest, it is easier the take the whole bumper off than just the lip.

They are very easy to remove.

4 screw in each wheel arch
8 screws underneath
4 screws to remove the grill
some mk5s have 2 screws in the front slam panel too. Some don't

then it just slides off

to take off the lip you still have to remove screws from the arches, all the ones underneath and then you have to unclip about 20 clips holding the lip to the bumper which are a beeehatch! Then to refit, it's just as problematic. Those clips can be quite stubborn

Offline monte

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 116
  • -Receive: 134
  • Posts: 2747
  • Global Ruler
    • Deep-Shine Detail. Detailing-Wrapping-Tints. Lincoln.
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,67679.0.html
Re: Removing front bumper or if possible, the front lip (Edition 30)
« Reply #3 on: March 20, 2010, 10:25:50 pm »
To be perfectly honest, it is easier the take the whole bumper off than just the lip.

They are very easy to remove.

4 screw in each wheel arch
8 screws underneath
4 screws to remove the grill
some mk5s have 2 screws in the front slam panel too. Some don't

then it just slides off

to take off the lip you still have to remove screws from the arches, all the ones underneath and then you have to unclip about 20 clips holding the lip to the bumper which are a beeehatch! Then to refit, it's just as problematic. Those clips can be quite stubborn


What about the rear bumper Jay? Is that as straight forward as it looks? I am gonna take off the rear bumper to carbon my diffuser  :wink:

Offline Vick N

  • Always Involved
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 0
  • Posts: 150
    • Email
Re: Removing front bumper or if possible, the front lip (Edition 30)
« Reply #4 on: March 28, 2010, 07:30:59 pm »
To be perfectly honest, it is easier the take the whole bumper off than just the lip.

They are very easy to remove.

4 screw in each wheel arch
8 screws underneath
4 screws to remove the grill
some mk5s have 2 screws in the front slam panel too. Some don't

then it just slides off

to take off the lip you still have to remove screws from the arches, all the ones underneath and then you have to unclip about 20 clips holding the lip to the bumper which are a beeehatch! Then to refit, it's just as problematic. Those clips can be quite stubborn

Thanks dude, I can leave the lip on If the whole bumper comes off in one go, only want to carbon wrap the lip  :happy2:

What about headlamp washers? do they just unplug? Will they create any faults on the Ecu?  :confused:

Ta.

Vick

Offline mortygttdi

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 146
  • Posts: 2370
Re: Removing front bumper or if possible, the front lip (Edition 30)
« Reply #5 on: March 28, 2010, 10:57:59 pm »
Vick if you take the full bumper off, its just a pipe that unclips from the pump there is also the foglights to unplug...

Darren :happy2:

Offline Vick N

  • Always Involved
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 0
  • Posts: 150
    • Email
Re: Removing front bumper or if possible, the front lip (Edition 30)
« Reply #6 on: March 29, 2010, 07:12:21 pm »
Vick if you take the full bumper off, its just a pipe that unclips from the pump there is also the foglights to unplug...

Darren :happy2:

Thanks Darren, helpful as always  :drinking:

Offline s3dubbin

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 1
  • -Receive: 18
  • Posts: 870
    • Email
Re: Removing front bumper or if possible, the front lip (Edition 30)
« Reply #7 on: March 29, 2010, 08:55:51 pm »
Monte - I removed my s3 8p rear bumper yesterday with no trouble at all, not a lot holding it on. Remove the plastic trimming, tail lights and a whole bunch of hex screws in the arches and it just slips off, not a mk5 bumper but must be roughly the same.

Offline Vick N

  • Always Involved
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 0
  • Posts: 150
    • Email
Re: Removing front bumper or if possible, the front lip (Edition 30)
« Reply #8 on: April 12, 2010, 12:46:56 am »


 :laugh:

Offline monte

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 116
  • -Receive: 134
  • Posts: 2747
  • Global Ruler
    • Deep-Shine Detail. Detailing-Wrapping-Tints. Lincoln.
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,67679.0.html
Re: Removing front bumper or if possible, the front lip (Edition 30)
« Reply #9 on: April 12, 2010, 10:34:00 am »
^^^ Well done Vick, I'd love a garage that size.....needs a good sort out though  :signLOL:

Offline Vick N

  • Always Involved
  • ****
  • Thank You
  • -Given: 16
  • -Receive: 0
  • Posts: 150
    • Email
Re: Removing front bumper or if possible, the front lip (Edition 30)
« Reply #10 on: April 17, 2010, 06:20:07 pm »
^^^ Well done Vick, I'd love a garage that size.....needs a good sort out though  :signLOL:

Mate tell me about it  :grin:

I seem to clean it, then over  a few weeks seem to add more crap in it!  :sad1:  :grin: :grin: