Make a donation

Author Topic: Basic flap settings with OBD eleven  (Read 2351 times)

Offline Wastedspark

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 20
    • Email
Basic flap settings with OBD eleven
« on: December 25, 2020, 09:27:45 pm »
Merry Christmas everyone hope your all well,

So I’ve been having a couple of issues with the GTI lately, sluggish cold start and I feel a lack of torque mid range,
This all started after I cleaned the intake valves in the summer,
This morning before for the turkey I did a quick code scan and I wasn’t surprised to see the 2 runner flap codes, so I have searched for answers and commonly see that I should do a basic settings but I can’t find anything explaining if I can do this with OBD eleven pro,

So is it possible?

There is a chance that I haven’t plugged the motor in after taking the manifold off.😂

Thanks Martin

Offline GVK

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 1
  • -Receive: 67
  • Posts: 830
    • GVKmotorsport
    • Email
Re: Basic flap settings with OBD eleven
« Reply #1 on: December 25, 2020, 10:37:18 pm »
This page describes basic settings, if obd eleven is pro version it should allow the settings

http://wiki.ross-tech.com/wiki/index.php/2.0l_TFSI_(AXX/BGB/BPJ/BPY/BWA)#Intake_Manifold_Runner

Offline Wastedspark

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 20
    • Email
Re: Basic flap settings with OBD eleven
« Reply #2 on: December 25, 2020, 10:43:37 pm »
Hi, thanks for that, I did come across that page during my search, I’ll give it a go, if anyone has done it with the OBD eleven and could talk me through it I’d appreciate the help,

Martin

Offline FJB

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 18
  • Posts: 110
Re: Basic flap settings with OBD eleven
« Reply #3 on: December 26, 2020, 04:14:44 am »
Start OBDEleven with ignition turned on and engine off
Go to control modules
Select engine
Select basic settings
type in 142 for group
press and hold the tick to run ADP
once it says ADP ok, you are finished
If ADP does not work then your flaps or flap motor need replacing
Free £50 credit when you switch to Octopus Energy using this link: https://share.octopus.energy/pearl-marsh-31

Offline Wastedspark

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 20
    • Email
Re: Basic flap settings with OBD eleven
« Reply #4 on: December 26, 2020, 11:25:33 am »
FJB thank you,

I found an easier way, just plug in the motor! Yes this idiot left it unplugged for 6 months! Only really noticed when it got cold,

At least I know how to reset it for next time,

Thanks Martin

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 689
  • Posts: 8353
Re: Basic flap settings with OBD eleven
« Reply #5 on: December 31, 2020, 11:08:13 pm »
 :doh:



2007 ED30 | 2009 TDI 140 | 2016 BMW 330D