Strong glue for front gti badge,

[imprezzaworks]

Anyone recommend something. Attempted gorilla glue we had but no good.

[Octoparrot]

I've had good results with this https://www.amazon.co.uk/Evo-Stick-Impact-Adhesive-Strength/dp/B002NPTNIK/ref=sr_1_12?crid=2KQYW9U2W0GOT&dchild=1&keywords=contact+adhesive&qid=1614959532&sprefix=contact+ad%2Caps%2C213&sr=8-12

I glued my passenger mirror glass back onto the backing with it and its still holding firm.

[imprezzaworks]

Cheers. Will go with that unless anyone recommends an amazon prime special as I'm impatient lol.

[maxamplitude10]

I'd go for Araldite which is a 2 part epoxy
Not sure if it'll be on prime tho?!!

[imprezzaworks]

Will have a mooch 👍

[imprezzaworks]

No idea where it came from but just come across this. See how it goes tomo.

https://www.amazon.co.uk/dp/B009BQ27BY/ref=cm_sw_r_cp_apa_fabc_QJRND8XC6XY9DN9DAPD4

[RetroRaz]

Surprisingly the screwfix no nonsense glue is VERY tough! Make sure to use gloves though. Ive used it to fix various things around the house, inside and out. Works well.

Sent from my VOG-L09 using Tapatalk

[GitFlog]

I've had good results with this https://www.amazon.co.uk/Evo-Stick-Impact-Adhesive-Strength/dp/B002NPTNIK/ref=sr_1_12?crid=2KQYW9U2W0GOT&dchild=1&keywords=contact+adhesive&qid=1614959532&sprefix=contact+ad%2Caps%2C213&sr=8-12

I glued my passenger mirror glass back onto the backing with it and its still holding firm.

You can't go wrong with good old evo stick. Just dont breath loads ofit in and go for a drive 

[imprezzaworks]

Ended up chancing my arm and buying a red ebay badge off a decent chap on ebay..

Not a direct fit, had to manipulate the holes but looks decent. They come with silver plates on the back so will look to trim or spray it black.