Hey Guys,
When i bought my ED30 last year, the previous owner had fitted Tarox6 Pot calipers a few years before selling the car. The front pads were a tad low, but not in dyer need of replacing. After a few weeks of driving, i started to get brake squeal, hence decided to change the pads for a set of OEM Tarox Corsa OEM pads. Drove the car for around a week, and they started squealing again. My pal who fitted them had applied copper grease prior, but it was driving me nuts, hence i opted to change the front discs for a set of Brembo drilled/grooved discs. These were fitted last Wednesday. All seemed fine.....until today and the cocking squealing has come back. So new discs and pads haven't cured this. I'm wondering if its to do with the wheel cleaner i am using? I use Autoglym non acid cleaner, and on occasions the wheels are also cleaned using Autoglym TFR. I'm also wondering if there is any sort of procedure i need to follow with new discs, as i recall years ago i was told to drive to 60mph then hard on the brakes, and to do that 7-10 times, then a gentle 10-15 min drive to ket the disc cool down?
