Help Please

[vRS Carl]

Hi Folks.

Had this fault on the car which is causing the Engine Light to come on

Happened yesterday i cleared the fault to see if it came back and it did today


                Address 01: Engine       Labels: 06F-907-115-AXX.LBL
Control Module Part Number: 1Z0 907 115 A    HW: 8P0 907 115 B
  Component and/or Version: 2.0l R4/4V TFSI     0040
           Software Coding: 0203000318070160
            Work Shop Code: WSC 12340 025 411431
1 Fault Found:

001089 - EVAP Emission Control Sys: Incorrect Flow
               P0441 - 002 - Lower Limit Exceeded - MIL ON
             Freeze Frame:
                    Fault Status: 11100010
                    Fault Priority: 0
                    Fault Frequency: 1
                    Mileage: 92441 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 08:41:18

             Freeze Frame:
                    RPM: 765 /min
                    Load: 20.8 %
                    Speed: 0.0 km/h
                    Temperature: 90.0∞C
                    Temperature: 18.0∞C
                    Absolute Pres.: 990.0 mbar
                    Voltage: 14.224 V

Ross-Tech wiki lists the following

Possible Causes

Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80) faulty/jammed
Evaporative Emission (EVAP) Canister Purge Solenoid Valve (N115) faulty/jammed
Evaporative Emission (EVAP) Canister Sealing faulty
Pipes between Tank Breathing and Throttle Body leaky/blocked

Possible Solutions

Check Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80)
Perform Output Test
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve (N115)
Check Evaporative Emission (EVAP) Canister
Perform Basic Setting
Check Pipes between Tank Breathing and Throttle Body

How do i perform a basic setting on the EVAP canister? is that the same as the throttle body alignment? as that was the only thing i could find in the Ross-Tech Wiki

Did the Output test on the N80 valve and it seemed ok so just wanted to do this other test before taking it to the Stealer. Would you believe the car is 2 Days out of Warranty  

Cheers in advance

Carl

[vRS Carl]

Think i may have found the problem. Not sure though but this certainly wont help





Carl

[QD MBE]

Thats the culprit.  Mine is broke too, but I have araldited mine with no problems.  A new cannister is pricey too!

[vRS Carl]

You can just replace the pipe

It's £8.50 Inc VAT for the breather pipe

Cannister is about £90 if that is the culprit though

Carl

[Janner_Sy]

carl is your car disintegrating. jesus christ.  at least it was a cheap fix

[vRS Carl]

Lol it is 3 years old so I suppose things do go wrong.

I've barstewardsised it for now with self amalgam tape.

Will see how it fairs on the drive up north

Carl