Make a donation

Author Topic: Uprated HPFP  (Read 2987 times)

Offline Numero9

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 2
  • Posts: 68
Uprated HPFP
« on: November 20, 2022, 08:51:33 pm »
08, manual, GTi, All standard, no maps

Been doing some reading on error code below. Seems the sensor in the HPFP maybe kaput. I don't believe they sell the top sensor separately from the pump so either a 2nd one from ebay is an option however it got me thinking like the Diverter Valve, is there an uprated version of this which I can fit which will avoid issues in the future?

000136 - Fuel Rail/System Pressure
P0088 - 001 - Too High - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 255
Mileage: 175823 km
Time Indication: 0
Date: 2000.00.00
Time: 18:11:11

Freeze Frame:
RPM: 1784 /min
Load: 27.4 %
Speed: 48.0 km/h
Temperature: 91.0°C
Temperature: 16.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 14.224 V

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 690
  • Posts: 8353
Re: Uprated HPFP
« Reply #1 on: November 22, 2022, 12:09:03 pm »
Nope


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D

Offline Numero9

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 2
  • Posts: 68
Re: Uprated HPFP
« Reply #2 on: November 23, 2022, 12:03:28 pm »
Nope

Am I right in that I have to buy the full HPFP and not just the sensor? Call to VW it is, not sure I feel comfortable using a used pump from a breakers.

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 690
  • Posts: 8353
Re: Uprated HPFP
« Reply #3 on: November 23, 2022, 04:21:07 pm »
Yep, the thrust sensor is not available separately, so you have to buy a whole pump. 


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D