Make a donation

Author Topic: metal wheel valve install?  (Read 689 times)

Offline antonis42

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 3
  • Posts: 68
    • Email
metal wheel valve install?
« on: May 29, 2023, 06:37:12 pm »
Hi,
anyone knows how to install metal wheel valves in earlier mk5 gti models (the bbs wheels had them).
What should the torque specs be for the outer washer, and does one need to apply any lubricant to the stems o-rings (say silicone based)?
The vw valve part number in question is: 1K0601361B
Some pics of the valve and wheel valve hole:

Thanks.
« Last Edit: May 29, 2023, 06:54:11 pm by antonis42 »

Offline Andy

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 443
  • Posts: 10929
    • Email
Re: metal wheel valve install?
« Reply #1 on: May 30, 2023, 05:47:50 pm »
The   valve should not need lubricant on it and the nut just slightly nipped

Offline terrier

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 38
  • Posts: 407
  • My Ride: GTI now gone
Re: metal wheel valve install?
« Reply #2 on: May 30, 2023, 06:48:09 pm »
Ive always used the ones with two rubber seals One inner One outer  Keep the washer away from the alloy It will corrode.
  As Andy said just nip them up Dont squash the rubbers
 

Offline pudding

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 2
  • -Receive: 689
  • Posts: 8353
Re: metal wheel valve install?
« Reply #3 on: June 03, 2023, 11:01:46 am »
Similar to TPMS sensors, it's something daft like 6nm. Hardly anything.  Remember, 35 psi of air pressure inside the tyre will push the valve hard into the seal anyway, so the nut is just to hold the valve body in place  :happy2:


2007 ED30 | 2009 TDI 140 | 2016 BMW 330D