All Things Mk5 > GIAC Zone

recent remap 30/3/2010

<< < (6/9) > >>

john_o:
have a look at two cars plots here

http://www.jkm.org.uk/performance/GalleryGTI041008.htm

one std K03 (white) and one REVO stg1 (grey)

in fact your hp seems not too bad.
torque is way down though.

you need to get some logging done on your boost levels etc.

b7unr:
how would i go about getting my boost level logged? would a boost gauge help what psi should it be?

 also i have looked at jkm graphs i`m starting to wounder if they actually carried out the remap or could it be a case of the remap didn`t go on my ecu properly.

  I`m not a mech but i`m starting to think the remap hasn`t worked as i have no cat and a kn fitted maybe the bhp is 204.5 due to this. torque looks pretty standard to.

 let me know if i`m wrong.

having new dv fitted this sat so that should help. i hope. :happy2:

scotta:
I would see how the dump valve fitting goes then get it back on the RR - maybe email GIAC directly see what they have to say.

b7unr:
HI well  all new parts fitted dv and manifold motor. went to regal and had a rr now 258.8 bhp and 295lbs torque. well happy :P

Apparently the bloke who rr it before didn`t turn traction control off properly.
I thought you pressed the button and when the car/skid marks shows up on dash that was it. BUT apparently for rr you have to turn it off once over 50mph?
Any one have any more info on this would be helpful

Thanks

edd666999:
good to hear!  :congrats:

Navigation

[0] Message Index

[#] Next page

[*] Previous page