Edition 30 engine cover same as a gti?

[mk1mad]

I have recently bought an Edition 30 with an induction kit, I am not that  keen on the noise and would   like to refit the original engine cover/airbox.
Are there any parts specific to the edition 30 that I will need ? or can I buy a k03 gti airbox?

[GVK]

Air filter element is a different part number, so I'm pretty sure they are different.

[mjmallia]

Engine covers are all the same for the GTI, S3, Leon Cupra, Octavia etc with the 2.0 TFSI.  Only difference is the badging/branding panel on top.

The Ed30 and S3 filters are slightly shorter in height and have an A or B at the end, and supposed to improve air flow apparently (what difference it actually makes I have no idea), otherwise the same shape.

I interchange between the standard GTI and Ed30/S3 filter depending on the cost at the time without issue.  (I seem to find the ED30/S3 filter cheaper most of the time)

[mk1mad]

Thanks for the replies, one further question is the pipe from the airbox to the turbo Ed30 specific to allow the diverter valve pipe to connect ?

[mjmallia]

Its K04 engine cars, so ED30, S3 etc

I have one on my K03 GTI as I relocated the DV to the K04 location.

[pudding]

ED30 engine cover has 2 plastic clip clamps for the DV pipe. K03 does not.

Could probably add those easily enough to a K03 cover though.

[mjmallia]

Good point as I had to add them when I did the K04 DV relocation.

The clips are cheap and two holes need to be drilled........locations are on the cover already 

[skkane]

I'd recommend getting a HPFP cover plate if you're going to put the engine cover on. The sensor on top has been known to crack due to vibrations and you will need a new HPFP if that happens as they're not sold separately.

It looks like this -> https://www.vismotorsport.com/product-page/hpfp-cover-shield-suport-inox