Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: K03 turbo outlet diameter  (Read 1002 times)

Offline ajmludders

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 2
    • Email
K03 turbo outlet diameter
« on: April 10, 2024, 10:43:15 am »
I am thinking of upgrading the full exhaust system from the OEM stock but wondering if a 3-inch system will fit onto the stock k03 turbo mounting?

So for example would a Miltek 3-inch downpipe fit onto the K03 turbo mounting?

Thanks in advance!
Logged

Offline ZoliWorks

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 12
  • Posts: 147
Re: K03 turbo outlet diameter
« Reply #1 on: April 19, 2024, 07:53:36 am »
A 3 inch will be overkill for the K03 but will work if you later plan on going K04 because they use the exact same hot side downpipe mounts. Measurements are in cm.




Logged
Mk5 Jetta 2.0 TFSI BWA | Manual | Mk6 GTI Front | BorgWarner K04 Turbo | Sachs X-Tend OEM+ Clutch Kit | Ta-Technix Air Intake | Ta-Technix 200 Cell Downpipe | Ta-Technix Intercooler | Stock Injectors | Vis Motorsport 175 bar HPFP | 300hp

Offline ajmludders

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 2
    • Email
Re: K03 turbo outlet diameter
« Reply #2 on: April 19, 2024, 12:45:22 pm »
Thank you that's really helpful.  :happy2:
Logged
Pages: [1]   Go Up
« previous next »