All Things Mk5 > Mk5 General Area

Intercooler recommendations for a K04 conversion

(1/2) > >>

ZoliWorks:
Ever since I first mapped the car I felt like it always pulled better after it just got up to operating temperature compared to how it pulled after driving around for a bit. Well today I decided to log it again but this time included intake temps as well. surprise-surprise, it's not looking good. I guess that's what happens when you did a K04 swap, kept the stock intercooler and haven't yet replaced your leaking AC radiator that's bent up like hell.

So anyway, looking for suggestions on what IC to go with. I've been looking at the Ta-Technix cooler since I got both the downpipe and air intake from them. I've got no issues with those so far but I know (and knew from the start) that they are the same things you can find on Aliexpress but priced a bit higher. I was gonna order both the downpipe and intake from Ali, because I saw the exact same items there, but Ta-T did a sale and it came out cheaper than Ali.

https://www.tatechnix.de/tatechnix/gx/product_info.php?info=p37413_ta-technix-intercooler-kit-suitable-for-audi-a3-s3--8p----tt--8j----seat-leon--1p---skoda-octavia--1z---superb--3t----golf-v-vi--1k----jetta-iii-iv--1km-16-16h----eos--1f----passat--3c-3cc----scirocco-iii--13-.html&no_boost=1

Both of these logs come from the same pull. I went on the highway, made the first pull on the on ramp and the second after driving to a U-turn area that's 5km from the on/off ramp.

Ambient temp was 23 degrees here



Ambient temp was 20 degrees here

mjmallia:
What have you got on at the moment.

The original GTI/Ed30 one is not great to be honest.  I changed mine to the later revised (non alloy ends) Golf 6R/TSI/S3 8P intercooler and noticed a vast improvement.  It is deeper, has a more efficient core, and fits perfectly while also deleting the old bayonet hose connectors that leak boost.

mjmallia:

ZoliWorks:
Mine is stock, like base model stock. Plastic end caps, quick connect hoses. and the AC radiator's fins are all bent up so basically no air is passing through it. I'm surprised my car isn't overheating...

I'm replacing the AC rad cause it's been leaking since I got the car so while at it I might as well do the intercooler.

pudding:
I used the 6R intercooler as well. It worked great on my Edition 30.

The cooler bolts right in and you either need the 6R/S3 intercooler hoses as well, or you can cut the bayonet fittings off the original hoses, but I found the 6R/S3 hoses were a much better fit.  They can be had for peanuts off ebay used.

My A/C condenser was almost completely plugged so I replaced that as well and averaged 5 degrees above atmosphere over winter, and 8-10 over summer.  Much faster recovery rate than the stock GTI intercooler.

The ECU doesn't start pulling timing until intake temps hit 45 C, so your readings aren't too bad to be honest.

I prefer the OEM intercoolers as they balance the lag to cooling efficiency compromise pretty well, and it is the one they fitted to K04 engines, so you can't go wrong.

Navigation

[0] Message Index

[#] Next page