Make a donation

Author Topic: Recommend me a sports cat that will pass MOTs and not cause me bother  (Read 1628 times)

Offline dennis10

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 32
    • Email
Please could anyone recommend me a sports cat that will pass MOTs and not cause me bother for the foreseeable future?  I picked up a used stainless steel downpipe for just £25, but don't have any faith in the cat that is on it, so would like to purchase something that I can have welded in for peace of mind.



Offline Jons1001

  • Always Involved
  • ****
  • Thank You
  • -Given: 20
  • -Receive: 8
  • Posts: 436
Re: Recommend me a sports cat that will pass MOTs and not cause me bother
« Reply #1 on: April 15, 2025, 08:16:16 pm »
I think it’s going to be hard without spending a fair wad of cash. I had a magnaflow welded in and it passed 3 mot’s (about 30k miles) then failed miserably. BCS power valve are the best from what I can gather although I think you’d have to buy at least the downpipe. Hopefully someone else can recommend something.

Offline dennis10

  • Taking part
  • ***
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 32
    • Email
Re: Recommend me a sports cat that will pass MOTs and not cause me bother
« Reply #2 on: April 16, 2025, 05:32:41 pm »
Yeh seems difficult to find something reliable. I did message BCS directly to see if they could sell me just a cat on its own, but have heard nothing in a week.

Surely there is something out there that can be considered a decent cat.

Offline ZoliWorks

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 20
  • Posts: 214
Re: Recommend me a sports cat that will pass MOTs and not cause me bother
« Reply #3 on: April 17, 2025, 08:08:12 pm »
Depends on the tester and how far they are willing to go, but for the most part, any 200 cell cat will pass if revved high enough for a long enough period (4k rpm for 2 mins)

I just cut a section of my downpipe out and before each test I fit a sports cat. I use these kinds of clamps to hold the pipe/cat in place:


Mk5 Jetta 2.0 TFSI BWA | Manual | Mk6 GTI Front | BorgWarner K04 Turbo | Sachs X-Tend Clutch Kit | Ta-Technix Air Intake | Ta-Technix Cat-less Downpipe | Ta-Technix Sandwich Intercooler | OEM S3 Injectors | Vis Motorsport 175 bar HPFP | 350hp 480nm