Make a donation

Author Topic: Fitting a Towbar to a mk5 GTi...  (Read 11362 times)

Offline stow dubbers

  • Just Arrived
  • **
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 12
    • Email
Fitting a Towbar to a mk5 GTi...
« on: November 21, 2011, 09:25:21 pm »

Can anybody help....?

I want to fit a detachable towbar to my mk5 gti..... will i have to cut the bumper, have read somewhere that i might have to buy a "new skirt" from vee dubya..?

Any advice much appreciated...

Nick.

Offline alackofspeed

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 24
  • Posts: 414
    • Email
Re: Fitting a Towbar to a mk5 GTi...
« Reply #1 on: November 21, 2011, 10:32:35 pm »
Assuming we're talking a stock GTi and not an ED30 I'd suggest a Westfalia removable tow bar and a replacement lower rear bumper section from VW with the removable panel. VW call the lower bumper half  a 'spoiler' on ETKA, and it's about £50 + vat (part # 26 on the image below).

The towbar can be bought from any number of online sources, and it's a doddle to DIY.

« Last Edit: November 21, 2011, 10:35:06 pm by alackofspeed »

Offline billymac

  • Taking part
  • ***
  • Thank You
  • -Given: 5
  • -Receive: 3
  • Posts: 42
    • Email
Re: Fitting a Towbar to a mk5 GTi...
« Reply #2 on: November 22, 2011, 06:37:58 pm »
I took a towbar off my GT Sport which I'm going to advertise as soon as I get to 25 posts! It is not detachable but you do not have to cut or replace any bit of the bumper. I think it is called a swan neck? You can unbolt it and leave a little bit of bracket showing.

I'm needing a bumper strengthener bar. Part no 1 on the ETKA sheet above (which you will be removing for the tow bar) so a deal for a swap and £40 + postage my way is here if you're interested.

Here's a couple of pics









Undo two bolts and it is like this.



I just tucked the electrics up and cable tied them in a poly bag.

« Last Edit: November 22, 2011, 06:39:42 pm by billymac »