Make a donation

Author Topic: lumpy tickover  (Read 7594 times)

Offline cuzmk5

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 99
    • Email
Re: lumpy tickover
« Reply #15 on: May 18, 2010, 07:57:20 pm »
Sounds like a vacuum leak.. Check the PCV and DV before anything else..

thanks for the info.

can this be checked using vcds? Or do I have to visually inspect them? 

Offline jonnyc

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 15
  • Posts: 2180
  • Herrooooo!
    • Email
Re: lumpy tickover
« Reply #16 on: May 18, 2010, 08:01:27 pm »
Sounds like a vacuum leak.. Check the PCV and DV before anything else..

thanks for the info.

can this be checked using vcds? Or do I have to visually inspect them? 

For the PCV pull off the recirculation hose at the inlet manifold end (while the car is running) and block off the inlet manifold with your thumb, if the idle stabilises then thats your issue..

The DV (unless its really bad) wont cause as much of an issue, but unfortunately the only way to tell conclusively is to pull it off and inspect the rubber diaphragm..
APR Stage III TT-RS - 11.37 1/4 mile - 2.82 0-60 MPH

Build thread http://www.vagoc.co.uk/vb/showthread.php?t=3128

Offline cuzmk5

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 99
    • Email
Re: lumpy tickover
« Reply #17 on: May 18, 2010, 08:05:17 pm »
[ Invalid YouTube link ]
Sounds like a vacuum leak.. Check the PCV and DV before anything else..

thanks for the info.

Can this be checked using vcds? Or a is it visual inspection job?

Offline MattPoss

  • Always Involved
  • ****
  • Thank You
  • -Given: 15
  • -Receive: 9
  • Posts: 441
    • Email
Re: lumpy tickover
« Reply #18 on: May 18, 2010, 10:28:20 pm »
If its quite a big judder it could be  the dual mass flywheel maybe?!

Matt
Mk5 Golf GTI - DSG, BBS VZ's, S3 Front Brakes, Electric Seats, R32 Rear Lights, Xenon's, Colour Coded........

Offline Mandy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 95
  • -Receive: 94
  • Posts: 1701
  • Drink Russian, Wear Italian, Drive German :)
Re: lumpy tickover
« Reply #19 on: May 19, 2010, 09:12:38 am »
Since I've had the Bluefin remap, my car does the same when stationary, not all the time though and only very slightly so could be the remap as never noticed it before remap? (if you have one ). My car is 2 litre diesel though, not petrol...
................................................
Driving: Tornado Red MK7 GTD, BMW 330e
Drove: Rising Blue Golf 6R, Reflex Silver Edition30 No.1684, Tornado Red Mk5 Golf GTI

Offline winrya

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 7
  • -Receive: 16
  • Posts: 997
Re: lumpy tickover
« Reply #20 on: June 12, 2010, 08:25:25 am »
Did the new dv fix this?

Offline cuzmk5

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 99
    • Email
Re: lumpy tickover
« Reply #21 on: June 12, 2010, 12:12:52 pm »
Did the new dv fix this?

No. was back in last week for them to do some other checks. They have had to get in touch with vw about it as they dont no what it is. they gona be ringing me on monday. seems to be getting worse, alot more noticeable now.

Offline winrya

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 7
  • -Receive: 16
  • Posts: 997
Re: lumpy tickover
« Reply #22 on: June 12, 2010, 02:00:17 pm »
Can you see the rev's changing or is it just a feeling?

Offline cuzmk5

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 1
  • Posts: 99
    • Email
Re: lumpy tickover
« Reply #23 on: June 12, 2010, 10:10:21 pm »
Can you see the rev's changing or is it just a feeling?

revs dont change at all.

Saint Steve

  • Guest
Re: lumpy tickover
« Reply #24 on: June 12, 2010, 10:34:26 pm »
Sounds like a vacuum leak.. Check the PCV and DV before anything else..

He's right. Another thread on here from Zubgti, with same complaint, and Pcv valve faulty that cured it  :happy2:

http://www.mk5golfgti.co.uk/forum/index.php/topic,15111.0.html
« Last Edit: June 12, 2010, 10:36:42 pm by Saint Steve »