Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Watch out, here he comes!  (Read 3639 times)

Offline DavyP

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 120
Watch out, here he comes!
« on: May 10, 2010, 01:26:04 pm »

Haven't posted on here for while, well since I departed with my ED30.

As I'd said before I'd bought an Abarth 500, which I'd planned to have a few mods done to which I'm gonna tell you all about as I'm excited and I reckon it'll give  few of you a run for your money.

Norman is going for some surgery next Wednesday.  He is having an uprated Hybrid turbo fitted and an Itg cold air intake which has just been developed for the Abarth, so mine should be the first production version.  This will be combined with some live remapping and then paired up with a milltek shortly after and re-tweaked.

I've been told to expect a conservative 220 bhp and that in a car weighing a ton :driver:  so watch out. :happy2:
Logged
The world we live in and life in general.....

Offline Moschops

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 118
  • -Receive: 23
  • Posts: 1958
  • Edition 30 No 2275
Re: Watch out, here he comes!
« Reply #1 on: May 10, 2010, 01:27:18 pm »
Any pics of Norman... :smiley:
Logged
Cheers,

Wayne

Offline DavyP

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 120
Re: Watch out, here he comes!
« Reply #2 on: May 10, 2010, 01:31:43 pm »
Logged
The world we live in and life in general.....

Offline VC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 80
  • -Receive: 93
  • Posts: 4359
    • Very Cherry Stickers and Decals
Re: Watch out, here he comes!
« Reply #3 on: May 10, 2010, 01:42:58 pm »


so with the extra beans up front are you changing the suspension setup?  :smiley:
Logged

Offline mortygttdi

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 146
  • Posts: 2370
Re: Watch out, here he comes!
« Reply #4 on: May 10, 2010, 01:49:13 pm »
Has nice has the car is :happy2: I still don't think it would have a chance against an Eddy 30 :P but I could be swayed to change my mind if I see it happen :notworthy:

Darren
Logged

Offline PDT

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 3
  • -Receive: 142
  • Posts: 2010
    • Email
Re: Watch out, here he comes!
« Reply #5 on: May 10, 2010, 01:57:49 pm »
Just a quick note, The original ECU cannot be 'live mapped' in any way whatsoever, even with an emulator. The boot mode ( a state that you put the ecu into to allow reading/writing of map files)  is stored within the ECU itself and cannot be accessed with the engine running.

Logged

Offline DavyP

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 120
Re: Watch out, here he comes!
« Reply #6 on: May 10, 2010, 02:56:27 pm »
Custom mapped and tweaked to the car is what I was trying to say. I appreciate you correcting me , perhaps unnecessary but hey ho!
Logged
The world we live in and life in general.....

Offline DavyP

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 120
Re: Watch out, here he comes!
« Reply #7 on: May 10, 2010, 03:02:28 pm »
Quote from: Very Cherry on May 10, 2010, 01:42:58 pm


so with the extra beans up front are you changing the suspension setup?  :smiley:
.

Yeah,  there's a few different setups being trialled by other ABarth owners asthis is a bit of a weakness in the car. I'm waiting to see how these turn out before I commit to one. A lot of developements happening with the abarth. I know of one guy who's running 280bhp. Tuners have really taken to them.
Logged
The world we live in and life in general.....

Offline DavyP

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 120
Re: Watch out, here he comes!
« Reply #8 on: May 17, 2010, 09:08:39 am »

Quick update on the work so far, the new turbo has been installed and now the mapping is being carried out.  The spring on the modified wastegate actuator was too stiff and did not work well with the initial tests using the tuning box I had so this was temporarily replaced with the standard one.

 After a day spent mapping and tweaking the uprated actuator is going back on again.  The car is currently only running an ITG panel filter as the ITG intake production model is still being finalised and tested on the rolling road for proven gains before it is sold.

The car has been RR'd on a hub dyno and is currently giving 180bhp and 320 nm of torque, with the continued mapping tweaking and addition of the actuator and intake I've been told to expect an additional 25 or so bhp, boosting and holding longer at 1.4 bar and reaching 1.5 bar on overboost.  And all this form a car weighing just over 1000kg and with a 1.4 engine. :laugh: :driver:
Logged
The world we live in and life in general.....

Offline Tfsi_Mike

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 241
  • -Receive: 309
  • Posts: 10222
  • Go Large or Go Home
    • Tfsi Mikes Money Pit AKS / TTE / RTech St2+ Cupra
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,32721.msg402587.html#msg402587
Re: Watch out, here he comes!
« Reply #9 on: May 17, 2010, 09:47:38 am »

Good effort mate.  :laugh: Spirito di' TURBO  :driver:
Logged

Offline Janner_Sy

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 62
  • -Receive: 113
  • Posts: 5392
Re: Watch out, here he comes!
« Reply #10 on: May 17, 2010, 04:24:16 pm »
i really like them.  and 220hp/ton is pretty nice.  it'l corner like a house fly as wel once the suspension is sorted
Logged

Offline Andy

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 442
  • Posts: 10927
    • Email
Re: Watch out, here he comes!
« Reply #11 on: May 17, 2010, 07:27:44 pm »
just hope the bottom end holds up with all that extra power :rolleye:
Logged
Pages: [1]   Go Up
« previous next »