ED30 - K04 hybrid!

[Hurdy]

Update,

Confirmed via VCDS.

303gms/sec at 7350rpm from the K04 hybrid.

Still not fully tuned either.

[vRS Carl]

That works about at about 378bhp.

Isn't that less than you had before?

Or does this hold that power for longer?

[Hurdy]

Side by side the K04 hybrid is definitely faster up top.

ITG intakes are pulling in around 280gm/sec. Similar to Evoms and Twintakes.

Not my Hybrid BTW

Oh and it is running GIAC software.

[vRS Carl]

So do you reckon you could break the 400bhp mark if you put one on yours?

[Janner_Sy]

stadtler being playing with hybrids then have they.  this looks to me like you are about to fettle wit your turbo

was that with an ITG??

more importantly rather than just looking at that peak figure, what was the original g/s prior to the hybrid.  be good to see the gains

[Hurdy]

So do you reckon you could break the 400bhp mark if you put one on yours?

Who says I haven't

stadtler being playing with hybrids then have they.  this looks to me like you are about to fettle wit your turbo
was that with an ITG??
more importantly rather than just looking at that peak figure, what was the original g/s prior to the hybrid.  be good to see the gains

Nail on head

They use a VF intake.

You are looking at a good 20-30g/s increase, but I haven't seen the full logs graphed yet.

My Guesstimation (is that a word?) is that the air intake will pass the stock K04 around 3.5krpm and gain ground to the redline and still making power at the redline (7400rpm).

I'm also hoping that the g/s will increase when the mapping is completed. At the moment he is running a GIAC K04 race file.

[Janner_Sy]

you reckon you could get them to  post them up on here   im sure alot of guys would be intersted in that.

good news for jabaluke. this means the GIAC dsg remap hasno issues, so he could bin of his revo DSg jobbie. 

[Hurdy]

you reckon you could get them to  post them up on here   im sure alot of guys would be intersted in that.

good news for jabaluke. this means the GIAC dsg remap hasno issues, so he could bin of his revo DSg jobbie. 

Never thought of that, but you are right. Steve has no issues with his car at all.

Craig is already a member on here, but neither of them really get time out of running the business as they work 8am till 9pm most days.

I'll get hold of the logs next week and graph them to do a direct comparison if they are okay with it

[Hedge]

So do you reckon you could break the 400bhp mark if you put one on yours?

Who says I haven't

Me. Prove me wrong. 

[Hurdy]

So do you reckon you could break the 400bhp mark if you put one on yours?

Who says I haven't

Me. Prove me wrong. 

I drew this earlier

[micky 32]

What does the standard KO4 (mg) run at the redline? What gear to use 4th?

[bacillus]

What does the standard KO4 (mg) run at the redline? What gear to use 4th?

Technically you can use any gear but you may be limited by the sampling rate in vcds in first and second gear. There is adequate sampling rate in third gear upwards

[Hurdy]

What does the standard KO4 (mg) run at the redline? What gear to use 4th?

Mine ran 194g/s max (but drops off at redline)

I always run 3rd or 4th gears and ask for 4th for a dyno.

[Janner_Sy]

any more info then. 

have you spoken to revo about using their k04 stage 2+ software on the hybrid

[bacillus]

I suspect the standard revo map even with sps plus tweaking won't be able to fully handle the hybrid boost profile.