Couple of questions... Rear hubs, vwr bottom mount...

[Tfsi_Mike]

Who has painted the centre of the rear discs?  What paint did you use?  Saw some Hammerite spray on fleabay but havent seen anything like it over here in Germany.

Also whats the lifespan on the VWR lower mount?

Thanks in advance!

[Tfsi_Mike]

So the brake discs are masked up ready for painting...

Cant find a spray hammerite type paint over here.  I reckon normal paint wouldnt take without primer or would chip easier???

Anyone?

[johnboy07]

ive used hammerite on my fronts and rears on the centre parts but only the top edge not the front where the wheel buts up to. But then you wouldnt see that anyways so stupid to point that out 

[Tfsi_Mike]

ive used hammerite on my fronts and rears on the centre parts but only the top edge not the front where the wheel buts up to. But then you wouldnt see that anyways so stupid to point that out 

Did you use normal hammerite with a brush or find a hammerite spray?  Cant find anything like it over here in Germany :-(

[gazbutS3]

you need high temp paint really Mike

[Tfsi_Mike]

you need high temp paint really Mike

I first thought that but then thought the rear hubs probably ont get that hot??

[mb]

Did you use normal hammerite with a brush or find a hammerite spray?  Cant find anything like it over here in Germany :-(
[/quote]

I used Hammerite with a brush on mine.

[johnboy07]

i did use normal hamerite but i didnt see the high temp paint so i would use that if i did it again as you would be surprised how much heat can build up