All Things Mk5 > Revo Zone

What Settings Could I Run With Revo Stage 1 If I Got A Fuel Pump??

(1/4) > >>

Phil_T:
As above at the moment I have Revo Stage 1, Evoms Intake, Forge DV & Uprated Sachs Clutch. I will be getting a fuel pump next week so would like to know what settings I could run with the fuel pump fitted?? as at the mo I am Running B6 T6 F9.

Hurdy:
666 :scared:

Fuelling can move off 9 with a pump, but you really ought to get a TBE and go stage 2+ too :happy2:

gazbutS3:

--- Quote from: Phil_T on May 28, 2010, 09:42:00 pm ---As above at the moment I have Revo Stage 1, Evoms Intake, Forge DV & Uprated Sachs Clutch. I will be getting a fuel pump next week so would like to know what settings I could run with the fuel pump fitted?? as at the mo I am Running B6 T6 F9.

--- End quote ---

I ran them exact settings before I fitted the pump on stg1, and it ran great once the pump was fitted, really grunty and pulled very cleanly

vRS Carl:
You can't just use settings that other people use.

Every car reacts differently to the settings. You can have 2 identical cars with identical mods and they will produce different results on the same settings.

If you are going to change settings you need to log with VCDS and check things like Fuel Trim, Cylinder Timing Correction etc to ensure you aren't running for example excessive correction in cylinders.

Carl

RedRobin:

--- Quote from: vRS Carl on May 28, 2010, 10:01:55 pm ---You can't just use settings that other people use.

Every car reacts differently to the settings. You can have 2 identical cars with identical mods and they will produce different results on the same settings.

If you are going to change settings you need to log with VCDS and check things like Fuel Trim, Cylinder Timing Correction etc to ensure you aren't running for example excessive correction in cylinders.

Carl

--- End quote ---

.... x 2

What Carl says is important.

Navigation

[0] Message Index

[#] Next page