Headlight switch removal

[182_blue]

Ok, had a little play but didn't really try hard as i don't want to break it, i read that pushing the switch in slightly and turning it clockwise removes it, but it didn't, anyone one else tried it ?, if so how did you remove it

[Greeners]

PM Dario Shaun as I think he's changed his?

[182_blue]

cheers, will try him, im sure its very easy but before i get my trim pullers out i thought i would ask

[VC]

Removing

–   Switch off ignition and all electrical consumers.
–   Turn rotary grip of light switch to position “0”.
–   Push in rotary grip of light switch -1- and turn it clockwise slightly -2-.
       
–   Hold grip in this position and pull light switch out of dash panel using grip -3-.
 


Disconnect connector -arrow-



Installing

–   Fit connector to light switch. (as above)


–   Hold light switch and press rotary part of light switch firmly inwards -1- and turn slightly to right -2-.
–   Hold grip in this position and insert light switch in dash panel -3-.
–   Turn grip of light switch to position “0”, release and engage switch.
 


 

[Greeners]

Doesn't get any clearer than that  Nice one VC 

Looking forward to seeing the results Shaun 

[182_blue]

Thanks for the picture good reference for everyone else ,but as i said above i have tried this, anyway i have done it by getting it from behind 

thanks again

[Greeners]

Thanks for the picture good reference for everyone else ,but as i said above i have tried this, anyway i have done it by getting it from behind 

thanks again

Oh dear 

[182_blue]

Thanks for the picture good reference for everyone else ,but as i said above i have tried this, anyway i have done it by getting it from behind 

thanks again

Oh dear 

the release mechanism wasnt releasing, i guess they get a bit stuck up, i have lubed it a tad and it now comes out as per instructions 

[Greeners]

Shaun, read your post again, did you mean 'get at it from behind' 

Now your mentioning Lube 

Sorry mate, I think im in a silly mood!! 

[VC]

Sorry mate, I think im in a silly mood!! 

something on your mind mate? 

dirty boy 

[Greeners]

Sorry mate, I think im in a silly mood!! 

something on your mind mate? 

dirty boy 

It must have been all that sausage talk in the Santa Pod thread 

[182_blue]

sorry, baby sitting and not concentrating 

[SteveP]

I take it by these recent questions you have purchased the parts like Dario???

[182_blue]

I take it by these recent questions you have purchased the parts like Dario???

i dont have the bits, just considering :-)

[SteveP]

If you have found out the part numbers can you post them up some where like the useful info section