Arch Rolling Up North

[Cooper]

Anybody know of anywhere up North (closer to Teesside the better) that's any good at Arch rolling? Willing to travel to have them done but don't want to be going too far!

Want to get my Rears flared as they are rubbing like hell since putting my Splits back on already need re-painting as the paints cracked from the tyres catching so figured I might aswell get them flared a little before re-painting.

Any recommendations?

Cheers 

[Tfsi_Mike]

Ive been told these are good

http://www.archenemy.co.uk/?page_id=67

[Garth]

Ive been told these are good

http://www.archenemy.co.uk/?page_id=67

I used them and they are very good 

[Tfsi_Mike]

Ive been told these are good

http://www.archenemy.co.uk/?page_id=67

I used them and they are very good 

On the mk5??

[monk]

Can Alan Fishburn not do it for you?

[Garth]

Ive been told these are good

http://www.archenemy.co.uk/?page_id=67

I used them and they are very good 

On the mk5??

Nope, on an E46 beemer. There's no point rolling the arches on a mk5 as there is virtually no lip and therefore no real gains to be had. You can stretch the arch, but I have yet to see it done well on a mk5 due to the shape of the arch.

[Tfsi_Mike]

Thats what i thought lol
 

[Top Cat]

There is no arch to roll on the MK 5 rears you would get maybe a mil if you were lucky, you can get them to pull them a bit but this would be a big risk of damage. 

[Cooper]

I just want the rears pulled a little as they are rubbing all the time, already need re-painting due to the rubbing so might aswell get them pulled save them getting wrecked again

[Andy]

Can Alan Fishburn not do it for you?

Think Alan @Darlington doesn't do much work thier now

[big al]

I just want the rears pulled a little as they are rubbing all the time, already need re-painting due to the rubbing so might aswell get them pulled save them getting wrecked again

Would smaller/thinner tyres not sort it?

[Cooper]

Would smaller/thinner tyres not sort it?

I'm already running with a bit of stretch, got 225/40's on a 9.5" rim, don't really want to go any further than that with the stretch.

[TheBIGJAYY]

did you manage to get your rear arches flared mate?

i know im bringing this thread up from a good while ago but im having some issues with my arch catching my rim if going over a bump on a corner. doesnt always happen, happened about 3 times but has chipped a bit of the paintwork off which ill obviously need to get sorted so i am now in the same position as you where....

arches need repainting etc but i want to get them pushed out a bit first.

is this even possible? or would i need to look at having arches cut out + wider ones installing?

[Tfsi_Mike]

I had mine done at AKS tuning in Bedford 

[TheBIGJAYY]

I had mine done at AKS tuning in Bedford 

the rears? and you have a leon not a mk5. by looking at the arches iv no idea how they would be flared. basically im wanting the lip of my arch pushing out as its the actual lip (not the inside of the arch) which is catching my wheel.