The ultimate Dyno Graph thread

[rich83]

289 @ wheel and  i presume 250 is at the flywheel or is it the other way around?

Why whats the matter with it?

[Sunglasses Ron]

Didn't see the 289  .. Yeah, other way round Rich.. 

[rich83]

Didn't see the 289  .. Yeah, other way round Rich.. 

 

Pulls very nicely... but these wet roads are making my dash board flash like a christmas tree. 

[Sunglasses Ron]

Remember it well mate.. Wait till the roads get proper greasey..  Stage 2+ is even funnier. Mine use to flash at 70+mph at times.. 

[Neilgti]

Stage 2 Revo mk6 GTI 

[PDT]

These tsi's are really making some massive torque figures!

[Neilgti]

These tsi's are really making some massive torque figures!

This was my stage 1 map before full Milltek and stage 2 carbonio thought it would of got a few more horses on stage 2 with other mods on ?

[dodds-gttdi]

Car:  Golf GT TDi Mk5 2.0 TDI BKD Engine Code

tuner/stage/settings: Shark Performance STS (Self Tuning System) Stage 1 Generic Map

Modifications: Mostly Stock with V-power and straight thru exhaust in stead of back-box (from rear axle to twin GTI exit)

Type of Dyno/operator: DASTEK Dynamometer

miscellaneous details:  High torque Figure and Good Smooth delivery curve. Higher power output figures than Shark's website quote and higher than average mapped 140 TDI's. 

181.8 bhp 301.6 lb/ft

[mark53]

Golf GTI Edition 30 with Revo stage one map 

[ktlstar]

336ftlb very good if thats accurate. Someone posted a revo stage 1 on a ed30 and got 290ftlb - AMD mapped it

Are you local to AMD ?

[mark53]

336ftlb very good if thats accurate. Someone posted a revo stage 1 on a ed30 and got 290ftlb.

Are you local to AMD ?

about 30 minutes away

[daz_pd]

My Stage 1 2.0 TSI, happy with the figures, but a little concerned about the "spike" low down, anyone any thoughts the dyno operator said its because its running too rich, also see my AFR below

[damoegan]

My Stage 1 2.0 TSI, happy with the figures, but a little concerned about the "spike" low down, anyone any thoughts the dyno operator said its because its running too rich, also see my AFR below

What software are you running?

Rich running wont cause a boost/torque spike, its all down to how its mapped..

[daz_pd]

Well I don't like to name and shame either, its a well known tuner, I havent (since I last checked) any fault codes logged, so it has to be the map then? My only other mod is a carbonio intake

[shark_90]

The spike is down to the DSG, we've seen it on our dyno too. The manual version on 100% identical map doesn't do that, it's a smooth torque curve. We did a DSG remap on that car in order to solve it but unfortunately the customer didn't have time to wait for us to re-run the car. He is coming back for other work though, so we will have the opportunity to dyno it.