All Things Mk5 > Performance Modifications
The ultimate Dyno Graph thread
Scottymon:
Yikes. :evilgrin:
gilesthedog:
Mk5 Gti with K03, the original values of 219HP/226ft/lbs (in red) were without the remap, but with the Evoms intake and 3" downpipe and sports-cat fitted. A new Autotech fuel pump was fitted along with cam follower, remap also included the DSG, what a different car, very useable power.
jasam:
--- Quote from: danishmkvgti on March 19, 2015, 05:20:14 pm ---
--- Quote from: s31teg on March 13, 2015, 08:53:36 am ---
--- Quote from: jasam on March 03, 2015, 10:11:50 pm ---Leon FR 2.0 TFSI, K04, Loba hpfp, RS4 fpv, S3 injectors, Forge twin take, Forge twincooler, Full milltek exhaust, Forge dump valve, Revo stage 3 remap
Revo settings: B8 T3 F8
I havent been on dyno, but if I can believe my maf readings, I have between 300 and 310 bhp. It must go up ! :D when I put settings to 969
--- End quote ---
You're running stage 3 Revo and are expecting them results with supporting mods?
stage2+ produces 360 on settings B9 T5 F7
Did your tuner not have a dyno? You should get it on there!
--- End quote ---
There's 2 different revo stage 2+ mind you; 1 for the cars having a K04 as standard and showing 360bhp. The one for non K04 but K03 equipped as Jasam is for K03 and shows 280bhp for 2+. Jasam has REVO stage 3 for non OEM equipped K04 cars and has potential for same 360 bhp depending on hardware setup, but will be limited in torque due to his weaker conrods :)
--- End quote ---
yes, I have k03 car (leon fr) but now is k04, and other mods... and 300 bhp average on maf readings. Thats seems low isnt it? what can be reason.. I have all hardware required from revo stage 3 recommendations
sorry for bad english
s31teg:
--- Quote from: jasam on October 09, 2015, 06:41:16 pm ---
--- Quote from: danishmkvgti on March 19, 2015, 05:20:14 pm ---
--- Quote from: s31teg on March 13, 2015, 08:53:36 am ---
--- Quote from: jasam on March 03, 2015, 10:11:50 pm ---Leon FR 2.0 TFSI, K04, Loba hpfp, RS4 fpv, S3 injectors, Forge twin take, Forge twincooler, Full milltek exhaust, Forge dump valve, Revo stage 3 remap
Revo settings: B8 T3 F8
I havent been on dyno, but if I can believe my maf readings, I have between 300 and 310 bhp. It must go up ! :D when I put settings to 969
--- End quote ---
You're running stage 3 Revo and are expecting them results with supporting mods?
stage2+ produces 360 on settings B9 T5 F7
Did your tuner not have a dyno? You should get it on there!
--- End quote ---
There's 2 different revo stage 2+ mind you; 1 for the cars having a K04 as standard and showing 360bhp. The one for non K04 but K03 equipped as Jasam is for K03 and shows 280bhp for 2+. Jasam has REVO stage 3 for non OEM equipped K04 cars and has potential for same 360 bhp depending on hardware setup, but will be limited in torque due to his weaker conrods :)
--- End quote ---
yes, I have k03 car (leon fr) but now is k04, and other mods... and 300 bhp average on maf readings. Thats seems low isnt it? what can be reason.. I have all hardware required from revo stage 3 recommendations
sorry for bad english
--- End quote ---
Does seems very low. Where you get turbo from? You running revo?
Need to post some vagcom logs.
jasam:
Revo stage 3.
maf readings 285-300 bhp depending on temperature.
here is last log , coments are welcome
http://s000.tinyupload.com/index.php?file_id=58174470713185061800
Here is also fuel rail pressure logged : http://s000.tinyupload.com/index.php?file_id=63057323356790037569
Mods
k04
forge twincooler
forge twin take
loba hpfp internals
s3 injectors
Full miltek, decat
forge dv
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version