The ultimate Dyno Graph thread

[MC71]

Damn.....1 more pony than mine! 

[s31teg]

Though would post mine

ED30 DSG
Revo S2+

[jasam]

Leon FR 2.0 TFSI, K04, Loba hpfp, RS4 fpv, S3 injectors, Forge twin take, Forge twincooler, Full milltek exhaust, Forge dump valve, Revo stage 3 remap

Revo settings: B8 T3 F8


I havent been on dyno, but if I can believe my maf readings, I have between 300 and 310 bhp. It must go up ! :D  when I put settings to 969

[s31teg]

Leon FR 2.0 TFSI, K04, Loba hpfp, RS4 fpv, S3 injectors, Forge twin take, Forge twincooler, Full milltek exhaust, Forge dump valve, Revo stage 3 remap

Revo settings: B8 T3 F8


I havent been on dyno, but if I can believe my maf readings, I have between 300 and 310 bhp. It must go up ! :D  when I put settings to 969

You're running stage 3 Revo and are expecting them results with supporting mods?
stage2+ produces 360 on settings B9 T5 F7

Did your tuner not have a dyno? You should get it on there!

[danishmkvgti]

Leon FR 2.0 TFSI, K04, Loba hpfp, RS4 fpv, S3 injectors, Forge twin take, Forge twincooler, Full milltek exhaust, Forge dump valve, Revo stage 3 remap

Revo settings: B8 T3 F8


I havent been on dyno, but if I can believe my maf readings, I have between 300 and 310 bhp. It must go up ! :D  when I put settings to 969

You're running stage 3 Revo and are expecting them results with supporting mods?
stage2+ produces 360 on settings B9 T5 F7

Did your tuner not have a dyno? You should get it on there!

There's 2 different revo stage 2+ mind you; 1 for the cars having a K04 as standard and showing 360bhp. The one for non K04 but K03 equipped as Jasam is for K03 and shows 280bhp for 2+. Jasam has REVO stage 3 for non OEM equipped K04 cars and has potential for same 360 bhp depending on hardware setup, but will be limited in torque due to his weaker conrods :)

[danishmkvgti]

Leon Cupra 1P:

Built engine
Tubular manifold
Garret GTX3076R
REVO Stage 5
Eboost2
GFB DV+
1,79 Bar boost
Built by BNA Performance

[Pikey Motorsports]

Glad I sold mine now I wouldn't of been having that happen on the forum lol

[danishmkvgti]

Glad I sold mine now I wouldn't of been having that happen on the forum lol

What happen? :)

[yarickpi]

Do you plan to install and dyno the dynotech headers and cats as well for comparision against the ARH??

Tony

[Hurdy]

2010 Golf R MK6 DSG

99ron fuel only
Pump map
GIAC Stage 3 mapping.
Nortech BT kit and supporting hardware for fuelling etc.
Power is at the flywheel.

[Scottymon]

Yikes.

[gilesthedog]

Mk5 Gti with K03, the original values of 219HP/226ft/lbs (in red) were without the remap, but with the Evoms intake and 3" downpipe and sports-cat fitted. A new Autotech fuel pump was fitted along with cam follower, remap also included the DSG, what a different car, very useable power.

[jasam]

Leon FR 2.0 TFSI, K04, Loba hpfp, RS4 fpv, S3 injectors, Forge twin take, Forge twincooler, Full milltek exhaust, Forge dump valve, Revo stage 3 remap

Revo settings: B8 T3 F8


I havent been on dyno, but if I can believe my maf readings, I have between 300 and 310 bhp. It must go up ! :D  when I put settings to 969

You're running stage 3 Revo and are expecting them results with supporting mods?
stage2+ produces 360 on settings B9 T5 F7

Did your tuner not have a dyno? You should get it on there!

There's 2 different revo stage 2+ mind you; 1 for the cars having a K04 as standard and showing 360bhp. The one for non K04 but K03 equipped as Jasam is for K03 and shows 280bhp for 2+. Jasam has REVO stage 3 for non OEM equipped K04 cars and has potential for same 360 bhp depending on hardware setup, but will be limited in torque due to his weaker conrods :)

yes, I have k03 car (leon fr) but now is k04, and other mods... and 300 bhp average on maf readings. Thats seems low isnt it? what can be reason.. I have all hardware required from revo stage 3 recommendations

sorry for bad english

[s31teg]

Leon FR 2.0 TFSI, K04, Loba hpfp, RS4 fpv, S3 injectors, Forge twin take, Forge twincooler, Full milltek exhaust, Forge dump valve, Revo stage 3 remap

Revo settings: B8 T3 F8


I havent been on dyno, but if I can believe my maf readings, I have between 300 and 310 bhp. It must go up ! :D  when I put settings to 969

You're running stage 3 Revo and are expecting them results with supporting mods?
stage2+ produces 360 on settings B9 T5 F7

Did your tuner not have a dyno? You should get it on there!

There's 2 different revo stage 2+ mind you; 1 for the cars having a K04 as standard and showing 360bhp. The one for non K04 but K03 equipped as Jasam is for K03 and shows 280bhp for 2+. Jasam has REVO stage 3 for non OEM equipped K04 cars and has potential for same 360 bhp depending on hardware setup, but will be limited in torque due to his weaker conrods :)

yes, I have k03 car (leon fr) but now is k04, and other mods... and 300 bhp average on maf readings. Thats seems low isnt it? what can be reason.. I have all hardware required from revo stage 3 recommendations

sorry for bad english

Does seems very low. Where you get turbo from? You running revo?

Need to post some vagcom logs.

[jasam]

Revo stage 3.

maf readings 285-300 bhp depending on temperature.

here is last log , coments are welcome

http://s000.tinyupload.com/index.php?file_id=58174470713185061800


Here is also fuel rail pressure logged : http://s000.tinyupload.com/index.php?file_id=63057323356790037569


Mods

k04
forge twincooler
forge twin take
loba hpfp internals
s3 injectors
Full miltek, decat
forge dv