Make a donation

Author Topic: Spigot rings - HELP!  (Read 2457 times)

Offline uk_stu

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 4
  • Posts: 117
    • Email
Spigot rings - HELP!
« on: August 30, 2010, 11:01:28 am »
Hi,

I've bought myself a set of bbs CH reps for my 1.6SE, I've just been to trial fit the wheel on the car and i need spigot rings...

This is where it gets interesting!!!

The Bore size of the rear hub is 57mm
The Bore size of the wheel is approx 74mm

I Cannot seem to find any spigot rings which cater for this amount of difference!!!

Can anybody shed some light or will i need to go to an engineering company and get some custom spigots made up?

Offline uk_stu

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 4
  • Posts: 117
    • Email
Re: Spigot rings - HELP!
« Reply #1 on: August 30, 2010, 11:05:19 am »
I've noticed on the box that the centre bore of the wheel is actually 73.1mm

Offline paulk

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 9
  • Posts: 460

Offline paulk

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 9
  • Posts: 460

Offline uk_stu

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 4
  • Posts: 117
    • Email
Re: Spigot rings - HELP!
« Reply #4 on: August 30, 2010, 03:09:25 pm »
Paul my friend you are a LEGEND!!

I obviously wasn't looking hard enough or didn't really know what i needed...

Offline paulk

  • Always Involved
  • ****
  • Thank You
  • -Given: 5
  • -Receive: 9
  • Posts: 460
Re: Spigot rings - HELP!
« Reply #5 on: August 30, 2010, 08:29:01 pm »
no problem  :happy2: just make sure we get some pics

Offline uk_stu

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 4
  • Posts: 117
    • Email
Re: Spigot rings - HELP!
« Reply #6 on: August 31, 2010, 03:15:17 pm »
There will deffo be pics when i get them on!!