Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: RNS 510 Coding  (Read 2689 times)

Offline coop

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 2
  • Posts: 66
    • Email
RNS 510 Coding
« on: July 28, 2010, 09:56:22 pm »
Hi Guys

i'm just about to install my rns 510 and was wondering do I defiantly need to code the unit and if so what do I need to buy and do?

Cheers
Logged

Offline 182_blue

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 20
  • -Receive: 54
  • Posts: 3373
Re: RNS 510 Coding
« Reply #1 on: July 28, 2010, 09:59:45 pm »
Quote from: coop on July 28, 2010, 09:56:22 pm
Hi Guys

i'm just about to install my rns 510 and was wondering do I defiantly need to code the unit and if so what do I need to buy and do?

Cheers

It depends on what the rns was programmed to do before you got it, I think most bits will work fine, but you might not get directions on the highline (if you have it), there will be errors when it's read via vcds etc but they don't affect the performance
Logged

Offline coop

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 2
  • Posts: 66
    • Email
Re: RNS 510 Coding
« Reply #2 on: July 28, 2010, 10:16:12 pm »
Dont know if I have the highline or not, ive got a display which displays the dsg status and trip info.
Logged

Offline 182_blue

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 20
  • -Receive: 54
  • Posts: 3373
Re: RNS 510 Coding
« Reply #3 on: July 28, 2010, 10:18:09 pm »
Quote from: coop on July 28, 2010, 10:16:12 pm
Dont know if I have the highline or not, ive got a display which displays the dsg status and trip info.

Is it about 3" high ?, and not half plastic, I.e full display
Logged

Offline coop

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 2
  • Posts: 66
    • Email
Re: RNS 510 Coding
« Reply #4 on: July 28, 2010, 10:37:27 pm »
Half plastic, bugger.
Logged

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: RNS 510 Coding
« Reply #5 on: July 29, 2010, 11:18:27 am »
Coop could you please post your threads in the relevent section, to save me moving them each day. Cheers.  :drinking:
Logged

Offline ady-gti

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 4
  • Posts: 71
Re: RNS 510 Coding
« Reply #6 on: July 29, 2010, 01:41:19 pm »
One thing I found with mine was that Bap protocol was enabled, should be for a mk6 but not for mk5. So when I used VCDS it gave lots of errors to do with intermittent communication problems with the DSG buttons on the stearing wheel etc.. I turned it off and all it well.
Logged

Offline coop

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 2
  • Posts: 66
    • Email
Re: RNS 510 Coding
« Reply #7 on: July 29, 2010, 07:41:18 pm »
Sorry Top Cat, new to forums, where should I be posting my noob rns questions? Cheers
Logged

Offline mortygttdi

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 146
  • Posts: 2370
Re: RNS 510 Coding
« Reply #8 on: July 29, 2010, 07:50:06 pm »
Coop it needs posting in the satnav and audio section mate :wink:
Logged
Pages: [1]   Go Up
« previous next »