Make a donation

Author Topic: Edition 30 P's Build thread! 365bhp  (Read 39896 times)

Offline keano

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 79
  • -Receive: 35
  • Posts: 1588
    • Email
Re: Edition 30 P's Build thread!
« Reply #60 on: November 18, 2010, 11:58:41 am »
Looks lovely  :happy2: What headlight bulbs do you have? Or is it a hid conversion?

Offline Edition_30_P

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 6
  • Posts: 377
  • Edition 30 P
    • Email
Re: Edition 30 P's Build thread!
« Reply #61 on: November 18, 2010, 05:09:05 pm »
Cheers Stealth!

I haven't yet got any better pictures as I've been really busy with work. I have also decided to get them Gloss Black and, to leave the Siler strip the same colour!  :happy2:
MK5 Golf GTI Edition 30|APR Stage 2+|Milltek Non Res TBE Decat|ITG Intake| Forge Twintercooler|Autotech HPFP Internals|Forge DV|R8 Oil Cap|AP Coilovers|WALK Kit|ECS Dog Mount| THS Mounts|Eibach F&R Anti Roll Bars|Sachs Uprated Clutch

Offline Edition_30_P

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 6
  • Posts: 377
  • Edition 30 P
    • Email
Re: Edition 30 P's Build thread!
« Reply #62 on: November 19, 2010, 03:28:13 pm »
@ Keano: They are genuine VW Xenons I bought from work... Got the leads from gareth @ Hazzy Dayz.
MK5 Golf GTI Edition 30|APR Stage 2+|Milltek Non Res TBE Decat|ITG Intake| Forge Twintercooler|Autotech HPFP Internals|Forge DV|R8 Oil Cap|AP Coilovers|WALK Kit|ECS Dog Mount| THS Mounts|Eibach F&R Anti Roll Bars|Sachs Uprated Clutch

Offline Edition_30_P

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 6
  • Posts: 377
  • Edition 30 P
    • Email
Re: Edition 30 P's Build thread!
« Reply #63 on: January 28, 2011, 11:26:35 pm »
UPDATE:

Hi Guys.

been a while since I've updated but, I, have since got my Huffs refurbed. After a lot of hastle, stressing and and complication I decided to lose the silver lip  :sad1:. This was because everyone i contacted to get them done was saying that it was going to be a big job because the previous owner of them had damaged the silver lip so bad it was going to cost £100+ a wheel to get it back to perfect and, thats more than i paid for them so decided to lose it and just gloss the whole wheel at work for £40 a wheel.

The outcome I'm very happy with.. Would've loved the silver lip but hey.. Beggers can't be choosers and, my nesxt set of wheels will look the Doogy's when I get them  :happy2: Here is a picture of them as they are now on the Car.



I also got and fitted my Edition 30 Non-Res Milltek Cat Back. Love the sound.. Could've done with being a bit deeper and louder but, it'll do  :happy2:! I had been thinking about whether to get the Milltek De-Cat or a custom Longlife De-Cat. I decided on the Longlife De-Cat as they'll do the same thing and I'll be saving myself £125 as the Milltek De-Cat would cost me £324 inc VAT delivered from the TT Roadsport shop (By the way which is a great price) and, from Longlife custom made it is £199 fitted.


Anyway, here is a picture of my Cat Back fitted to my Car :wink: :wink:. On Sunday I'm getting my R32 Front set up from ben-R and will fit them next saturday at work. I ordered today my Forge DV and, Eibach Front and Rear Anti Roll Bars. Hopefully into the middle of the month I should be getting my APR HPFP along with my Forge Twintake and, then when the De-Cat is made up I'll get it all fitted and go Stage 2+. Let the games begin :grin:

New


Old
MK5 Golf GTI Edition 30|APR Stage 2+|Milltek Non Res TBE Decat|ITG Intake| Forge Twintercooler|Autotech HPFP Internals|Forge DV|R8 Oil Cap|AP Coilovers|WALK Kit|ECS Dog Mount| THS Mounts|Eibach F&R Anti Roll Bars|Sachs Uprated Clutch

Offline Edition_30_P

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 6
  • Posts: 377
  • Edition 30 P
    • Email
Re: Edition 30 P's Build thread!
« Reply #64 on: February 05, 2011, 07:28:44 pm »
UPDATE:
05/02/2011

Today I fitted my R32 Front Brakes at work. Big thanks to my mates at work Solid and Karan for doing most of the work  :happy2:! Everything went on a dream just, need to get hold of some new "R" pad clips. A big difference to the standard set on the Car! Still bedding them in but, happy so far! Here's some pics of the fit:







And with the wheels on:



Also got this and fitted it today:



Got my decat which should've been fitted today but, got late and we went home.. Next up my Forge Twintercooler and my Fuel pump!!
« Last Edit: February 05, 2011, 11:39:17 pm by Edition_30_P »
MK5 Golf GTI Edition 30|APR Stage 2+|Milltek Non Res TBE Decat|ITG Intake| Forge Twintercooler|Autotech HPFP Internals|Forge DV|R8 Oil Cap|AP Coilovers|WALK Kit|ECS Dog Mount| THS Mounts|Eibach F&R Anti Roll Bars|Sachs Uprated Clutch

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: Edition 30 P's Build thread!
« Reply #65 on: February 05, 2011, 07:49:59 pm »
Hey Phil!

Nice looking motor you've got there mate, mean and moody  :happy2:

Shame I did'nt meet you today but thanks for the brakes anyway, I'm sure we'll meet up at some point.

I lost the polished rim on my Omanyts as its too much hassle to keep it, it only goes rotten again anyway and can always be recut at a later date.

If I was single again this is what I'd be doing but with an S3  :driver: but now the missus drains all my money  :love:

Keep up the good work mate.

Lee.
« Last Edit: February 05, 2011, 08:08:43 pm by apollo13 »
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline Edition_30_P

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 6
  • Posts: 377
  • Edition 30 P
    • Email
Re: Edition 30 P's Build thread!
« Reply #66 on: February 05, 2011, 09:50:08 pm »
Thanks, Lee!

Yea, wouldve been nice to meet ya! Good meeting Justin though! I want those rear lights you two have! They look wicked!
MK5 Golf GTI Edition 30|APR Stage 2+|Milltek Non Res TBE Decat|ITG Intake| Forge Twintercooler|Autotech HPFP Internals|Forge DV|R8 Oil Cap|AP Coilovers|WALK Kit|ECS Dog Mount| THS Mounts|Eibach F&R Anti Roll Bars|Sachs Uprated Clutch

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: Edition 30 P's Build thread!
« Reply #67 on: February 05, 2011, 09:56:33 pm »
If your not doing anything in the morning and fancy a drive come down to mine if you like.

Gotta fit Justins lights and new can gateway for him  :happy2:

****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline Edition_30_P

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 6
  • Posts: 377
  • Edition 30 P
    • Email
Re: Edition 30 P's Build thread!
« Reply #68 on: February 05, 2011, 10:00:22 pm »
Tomorrow would've been ok but, got my little sister tonite so don't fancy lugging her with me! Could do another time if you could squeeze me in!?
MK5 Golf GTI Edition 30|APR Stage 2+|Milltek Non Res TBE Decat|ITG Intake| Forge Twintercooler|Autotech HPFP Internals|Forge DV|R8 Oil Cap|AP Coilovers|WALK Kit|ECS Dog Mount| THS Mounts|Eibach F&R Anti Roll Bars|Sachs Uprated Clutch

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: Edition 30 P's Build thread!
« Reply #69 on: February 05, 2011, 10:06:32 pm »
Fair play mate, Missed out on bacon sarnies and bottomless tea though  :grin:

Anyones welcome at anytime at mine mate  :happy2:
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline Edition_30_P

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 6
  • Posts: 377
  • Edition 30 P
    • Email
Re: Edition 30 P's Build thread!
« Reply #70 on: February 05, 2011, 10:21:37 pm »
Bottomless Teaneck and Bacon sarnies would've gone down a treat! Will hold u to that for next ton, lol :grin:
MK5 Golf GTI Edition 30|APR Stage 2+|Milltek Non Res TBE Decat|ITG Intake| Forge Twintercooler|Autotech HPFP Internals|Forge DV|R8 Oil Cap|AP Coilovers|WALK Kit|ECS Dog Mount| THS Mounts|Eibach F&R Anti Roll Bars|Sachs Uprated Clutch

Offline bart

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 81
    • Email
Re: Edition 30 P's Build thread!
« Reply #71 on: February 05, 2011, 11:30:50 pm »
lovely car mate.why you changing to twintake?
Tornado red ed 30,dsg,rcd 510,milltek de cat tbe,walk kit,kw v3,revo stage 2+,dsg stage 2+,hpfp,itg cai

Offline Edition_30_P

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 6
  • Posts: 377
  • Edition 30 P
    • Email
Re: Edition 30 P's Build thread!
« Reply #72 on: February 05, 2011, 11:37:39 pm »
Thanks Bart! That was a typo.. It was meant to say twintercooler  :signLOL: Not getting rid of my ITG... Love that noise!!

Also thanks for the link  :happy2: Should be here next week!!
MK5 Golf GTI Edition 30|APR Stage 2+|Milltek Non Res TBE Decat|ITG Intake| Forge Twintercooler|Autotech HPFP Internals|Forge DV|R8 Oil Cap|AP Coilovers|WALK Kit|ECS Dog Mount| THS Mounts|Eibach F&R Anti Roll Bars|Sachs Uprated Clutch

Offline bart

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 81
    • Email
Re: Edition 30 P's Build thread!
« Reply #73 on: February 05, 2011, 11:47:59 pm »
no probs mate. ive just bought an itg waiting til next weekend to fit it.

is it really loud cos im not really a big fan of too much noise inside the car
Tornado red ed 30,dsg,rcd 510,milltek de cat tbe,walk kit,kw v3,revo stage 2+,dsg stage 2+,hpfp,itg cai

Offline Edition_30_P

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 6
  • Posts: 377
  • Edition 30 P
    • Email
Re: Edition 30 P's Build thread!
« Reply #74 on: February 05, 2011, 11:57:51 pm »
It's not loud but, it does have that Rally Turbo Whoosh which is AWESOME!!!!  :driver:
MK5 Golf GTI Edition 30|APR Stage 2+|Milltek Non Res TBE Decat|ITG Intake| Forge Twintercooler|Autotech HPFP Internals|Forge DV|R8 Oil Cap|AP Coilovers|WALK Kit|ECS Dog Mount| THS Mounts|Eibach F&R Anti Roll Bars|Sachs Uprated Clutch