All Things Mk5 > Superchips Zone

stage 2+ logs

(1/4) > >>

edd666999:
these dont look good  :signLOL:

so this is stage 2+ rail pressure in 3rd and 4th and boost in 4th

vRS Carl:
What car is this for?

Also have you got an uprated HPFP?

The rail pressure is fine as long as their is never more than a 5.0bar difference. Which from those logs you haven't so that is within acceptable limits. 

However Stage2+ should be requesting 130bar which is how it gets the extra power.

That stage 2+ file you have is only requesting 110bar which is stock iirc. So if you do have an uprated HPFP then the map isn't utilizsng it.

Let me guess this is Bluefin K03 Stage 2+ file.  :confused:  If it is I think Janner_Sy had the same map and changed as bluefin don't seem to be able to map Stage2+ for K03 cars.

edd666999:
its looking more like im going to have to change!

i cant however for a while so im trying to make my map as good as possible!

edd666999:
ok bluefin got back to me, he said the issue im having is down to my n75 valve...thats why its boosting higher than requested...


i have to replace it apparently....how likely (putting feelings about the map aside) is that?

i have done a little research and it doesn't look an easy job...

vRS Carl:
Are you getting any fault codes?

I really can't see that being the problem.

The problem from the looks of it to me is the Map isn't requesting the extra rail pressure.

I would get the car checked over by someone with VCDS (if you don't have it yourself) and see if you have an fault codes then go from there

I wouldn't want to replace the N75 for no reason :smiley:

Navigation

[0] Message Index

[#] Next page