All Things Mk5 > Mk5 General Area

ed30, same engine internals as Normal gti

<< < (8/13) > >>

Snoopy:
Im sure Robin can find it as i cannot remember were i posted it now  :rolleye: but i did ages ago go through ETKA and list all the differences with part numbers just before the edition30 came out.

RedRobin:
^^^^
Thanks Geoff! Yes, I remember it but finding it is quite a different matter!! :laugh:

Unfortunately there is so much conflicting info about this subject but it's not unreasonable to assume that ETKA may be right. Is it possible that ETKA info changed after the Ed30 came out? Some who have actually stripped both engines seem to disagree with some of the stated differences. Don't ask me who - It's a minefield!

Bottom line is, does it really matter? - I suppose it does if you are wanting to squeeze out the max power etc.

illyun:

--- Quote from: WhiteGTI on February 05, 2009, 09:53:24 am ---Does the ED30 have the same fuel pump as a normal GTI?

I experience falling fuel pressure when I put the boost up on my Revo, as the OEM fuel pump can't cope.

But I don't recall hearing that ED30's experience the same issues????

Thanks in advance,
Chris.

--- End quote ---

I had those issues when going up to Stage 2 Revo with my Ed30 - could have ran with the OEM pump, but would have had to run with retarded settings, so I went with the APR pump.

RedRobin:

--- Quote from: jonnyc on February 04, 2009, 11:54:30 pm ---Honestly, K04 on a K03 engine is safe

Jonny

--- End quote ---


--- Quote from: jonnyc on February 05, 2009, 12:03:58 am ---Revo have there demo TT running an Edition 30 K04 turbo set up, thats a demo car, being ran to the max on a daily basis, not only is it extremely fast, but also has ran with no problems what so ever.

Revo offer the stage 3 software for K04 conversions on 200hp 2.0T FSI engines.. Its a simple yet massively effective mod for the 200hp cars!

Jonny

--- End quote ---

....Also, VWR/RacingLine's 300R demo GTI is running K04 on a K03 engine and delivers in the region of 330 bhp. It has various mods though and a custom Superchips remap AFAIK.

DanGB:
As said before, its safe, I was running 380-385 on the 197hp rods. They aint the strongest, but they are pretty good. I did bend a rod, but thats a different matter lol. Its torque and bad tuning that will break them  :smiley:

Navigation

[0] Message Index

[#] Next page

[*] Previous page